COMMSCOPE SFG23RHDXL-15-4-126 Line Card Sector Frame Installation Guide
- June 17, 2024
- CommScope
Table of Contents
CommScope SFG23RHDXL-15-4-126 Line Card Sector Frame
Product Information
Specifications
- Product Name: SFG23RHDXL15-4-126
- Dimensions: 126″ (height) x 180″ (length) x 120″ (width)
- Weight: 1110.84 lbs
- Volume: 3917.43
- Surface Area: 33664.99
Product Usage Instructions
General Notes
- All metric dimensions are in brackets [X.X].
- For patent info, visit https://www.cs-pat.com.
Design Notes
- Before installing the appurtenance, identify any hazards or obstructions to the climbing facility and safety climb.
- Additional products may be required to maintain the integrity of the safety climb.
- During installation, temporary and/or permanent precautionary measures should be taken to preserve the climbing facility and/or safety climb.
Installation
- Tighten all bolts securing flat plates by the turn-of-nut method.
- Tighten all U-bolts using the turn-of-nut method, ensuring equal distance and equal force on each leg of the U-bolt.
Test
Perform necessary tests to ensure the product functions correctly and meets safety standards.
Packaging
- Packaging shall meet CommScope requirements per document IS-PL-3005.
- Place the printed document inside a polybag and then in the shipping container.
- Extra hardware may be supplied, bagged, and shipped.
FAQ
Q: What are the dimensions of the product?
- A: The product has a height of 126″, length of 180″, and width of 120″.
Q: How should I tighten the bolts securing flat plates?
- A: Tighten all bolts securing flat plates using the turn-of-nut method.
Q: Are additional products required for installation?
- A: Additional products may be required to maintain the integrity of the safety climb. Please refer to the design notes for more information.
GENERAL NOTES
- ALL METRIC DIMENSIONS ARE IN BRACKETS [X.X]
- FOR PATENT INFO: https://www.cs-pat.com
DESIGN NOTES
- ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED BEFORE INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
- UP TO 5.0° TAPER AVAILABLE ON MODELS THAT SUPPORT ADJUSTMENT
MANUFACTURING/SPECIAL REQUIREMENTS
- TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD.
- TIGHTEN ALL U-BOLTS USING THE TURN-OF-NUT METHOD WITH ATTENTION TO LEAVING EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
- TEST
PACKAGING
- PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005.
- PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER.
- EXTRA HARDWARE MAYBE SUPPLIED, BAGGED AND SHIPPED.
INSTALLATION INSTRUCTION
ACCESSORIES ORDERED SEPARATELY
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>