camry CR 4069 Blender User Manual
- June 6, 2024
- camry
Table of Contents
CR 4069 Blender
User Manual
SAFETY CONDITIONS. IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial purposes.
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 220-240V~ 50Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using around children. Do not let the children play with the product. Do not let children or people who do not know the device use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or
knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the
dangers associated with its operation. Children should not play with the device.
Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision. -
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
-
Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc.. Never
use the product in humid conditions. -
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid
hazardous situations. -
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
-
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
-
Never use the product close to combustibles.
-
Do not leave the appliance switched on or the charger connected to the mains unattended.
-
Do not let the cord hang over the edge of the counter.
-
To ensure more protection, it is recommended to install a Differential (RCD) in the electrical circuit with the differential current not exceeding 30 mA. In this case you have
to turn to the electrical specialist. -
Replacement of accessories can only be done with the equipment switched off.
-
The edges of the mixer are very sharp. Please take special care. Before proceeding to replace the cutting accessories of the mixer, remove the plug of the power cord from the socket.
-
Use only original accessories, included in the mixer set.
-
Do not use the appliance if it has been dropped or damaged in any other way.
-
During the operation of the appliance, do not cover the ventilation openings in the cabinet.
-
Do not use abrasive detergents to clean the case, as they can remove important informational graphic symbols such as: marks, warning signs, etc.
-
Never use the appliance for hot oil or fat (hot products).
-
Do not touch the appliance with wet hands.
-
Do not use the equipment to crush ice, bones, and other hard products or to grind nuts and coffee.
-
Do not put hands or cutlery into the bowl while the mixer is operating.
-
Observe the continuous operation time of the equipment for 50 seconds. After this time has elapsed and before restarting the equipment, wait 4 minutes. Both the excess of time of use of the device and the lack of sufficient rest of the same can cause irreparable damage to the engine. If the appliance is blocked, before cleaning, disconnect it from the power supply.
-
Before the first use, wash and dry the appliance thoroughly (see: cleaning and maintenance).
DESCRIPTION OF THE DEVICE (Figures 1 and 4)
| 1a Cup lid | 1d Blender cutting blades |
|---|---|
| 1b Cup bottom | 1e Engine unit |
| 1c Cup | 4f Switch indicator |
USING THE DEVICE
- Ensure that all blender elements are clean.
- Place the ingredients in the cup (1c). Do not exceed 600ml (Fig 2).
- Attach the blender cutting blades (1d) to the blade cup (1c) by screwing them onto the cup (Figure 3).
- Place the cup (1c) with the attached cutting blades (1d) on the engine unit (1e). Please note the position of the switch indicator (4f).
- Connect the power cord to a power socket.
- To start the blender, turn the cup (1c) to the right and turn on the button. Do not use the blender for longer than 2 minutes. T
- Remove the power cord from the power socket.
- Remove the cup (1c) from the engine unit (1e).
CLEANING AND MAINTENANCE
Clean the blender cup and cutting blades using water with dishwashing liquid
after every use.
The engine unit must not be cleaned under running water or immersed in water.
TECHNICAL DATA
Power: 500W
Power supply: 220-240V~ 50Hz
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. The used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance in the common waste bin.
SERWIS CENTRALLY
01-237 Warszawa ul.Ordona 2A
tel. 728 – 595 – 006
www.adler.com.pl
[email protected]
| | |
---|---|---|---
Velocity Fan CR 7306| Air Cooler CR 7905| Waffle maker CR 3025| Hair Clipper
CR 2821
| | |
Portable Cooler CR 93| Lint remover CR 9606| Blender CR 4058| Electric Blanket
CR 7407
| | |
Travel Iron CR 5024| Electric Kettle CR 1239| Food Slicer CR 4702| Trimmer CR
2921
| | | 
Bluetooth Speaker CR 1170| Kettle with temp. control CR 1289| Hairstyler set
CR 2024| Hair Dryer CR 2255
| | |
---|---|---|---
Steam iron CR 5018| Milk Frother CR 4464| Stand Fan CR 7306| Electric Kettle
CR 1169
| 
| |
Air conditioner CR 7907| Turntable CR 1113| Deep Fryer 3L CR 4909| Steam
Cleaner CR 7021
| | 
|
Popcorn maker CR 4458| Chocolate Fountain CR 4457| Ash Vacuum 25L 1200W CR
7030| Retro radio CR 1109
| | | 
Steam Iron CR 5029| Pressure cooker CR 6409| Slow Cooker CR 6410| Super silent
vacuum cleaner CR 7037