Scosche BTFREQ Pro Wireless Hands Free Car Kit User Guide
- June 6, 2024
- Scosche
Table of Contents
BTFREQ™ Pro
Wireless Hands Free Car Kit
User Guide
DEVICE SETUP
- SECTION A – Overview
- SECTION B – Power Up & Bluetooth Pairing
- SECTION C – Connecting to your Car’s Stereo
- SECTION D – Reconnect to your Device & 3.5mm AUX OUT Connection
- SECTION E – Streaming Music
- SECTION F – Making a Call
- SECTION G – Receiving a Call
- SECTION H – Voice Assistant Activation & Dual-Port USB Charger
SECTION A
1. FM Channel Display| 4. Multifunction Button (MFB)| 7. 3.5mm AUX OUT
(cable included)
---|---|---
2. Tuning Lever| 5. 12V Plug| 8. USB-A Charging Port
3. Microphone| 6. Channel Button| 9. USB-C Power Delivery Port
SECTION B
Power Up & Bluetooth Pairing
- Plug the BTFREQ PRO into your car’s 12V power socket.
- Enter the Bluetooth settings in your mobile device and enable the Bluetooth function. From the list of available accessories, find and select the “Scosche BTFMPD3”.
- Your phone will confirm once it is connected. Once connected, ensure your device is set to maximum volume.
SECTION C
Connecting to your Car’s Stereo F ind a weak station on your FM radio that has
no active broadcast signal.
Press the “CH” button (1), then turn the tuning lever up (2) or down (3) to
tune the BTFREQ PRO to match the frequency of your FM radio. If you experience
interference you may have entered an area where there is an active broadcast
signal on the station you are tuned to. Repeat the above steps to find a
different clear station.
Note: Press “CH” button to change frequencies on BTFREQ PRO (1). 
SECTION D
Reconnect to your Device
Transmitter Off: Once paired, the transmitter will automatically reconnect
when powered on.
Transmitter On: Reconnect-Tap Multi-Function Button (MFB) once ()
Note: Only tap MFB if the transmitter does not automatically reconnect.
Optional AUX OUT Connection
The source unit can be connected to the BTFREQ PRO through the AUX OUT port
using included 3.5mm audio cable.
SECTIO E
Streaming Music
Stream music using the music player on your phone. You can use the controls on
the BTFREQ PRO to control the music settings:
Play/Pause -Tap the MFB once
Track Forward -Turn tuning lever down
Track Back -Turn tuning lever up
SECTION F
Making a Call Use your mobile phone to make a call as you normally would.
Phone call audio will automatically stream through the BTFREQ PRO. Hang Up
-Tap the MFB once Redial last number called – Double tap MFB 
SECTION G
Receiving a Call Phone call will come in through the BTFREQ PRO. Press MFB
once to answer the call Press MFB once to end the call Press and hold MFB to
reject the call
SECTION H
Voice Assistant Activation
Press and hold the Multi-function button for 3 seconds to activate your
smartphone’s voice assistant.
Dual-Port USB Charger
Your BTFREQ PRO includes (1) USB-C port and (1) USB-A port to charge your
devices while driving. Simply connect using a cable suitable for your device
(not included). 
SPECIFICATIONS
Input Power: 12-24V
Bluetooth v5.0, Class II, up to 33 ft. (10m)
Bluetooth Profiles: HFP,A2DP
FM Transmitter Frequency Range: 88.1407.9M Hz (200 KHz steps)
USB-A Output: 5V 2.4A
USB-C Output: 3A / 9V 2.22A /12V 1.67A / USB PD 3.0
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Scosche Industries
1550 PacificAvenue
Oxnard, California 93030
Phone: 800-363-4490 x1/
805-486-4450 x1
www.scosche.com
Scosche Industries 2021
Scosche & MotorMouth are trademarks of Scosche Industries.
Other marks or brands are the property of their respective owners.
Devices and or appearance may vary.
Designed in Oxnard, California
SI BTFMPD3SR 4/21
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>