camry CR1265 Travel Kettle User Manual
- June 6, 2024
- camry
Table of Contents
Premium
CR1265
user manual
After each boiling cycle set the switch from position I to position O.
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial purposes.”
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 220-240V, ~50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using around children. Do not let the children play with the product. Do not let children or people who do not know the device use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or
knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision. -
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
-
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
-
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
-
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
-
Never use the product close to combustibles.
-
Do not let the cord hang over the edge of a counter or touch hot surfaces.
-
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
-
In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
-
If the kettle is overfilled it may spurt boiling water.
-
WARNING: Do not open the lid if the water is boiling.
-
The kettle must only be used with the provided base.
-
CAUTION: Before lifting the kettle from the base make sure that the kettle is turned off.
-
This equipment is intended for domestic and similar use, such as staff kitchens in stores, offices, and other work environments, utility rooms, by customers in hotels, motels, and other residential environments of this type, in bedrooms and dining rooms.
-
Always use caution when boiling water in the kettle. Do not touch the housing of the kettle or lid. Do not open the lid during boiling in a kettle or immediately after boiling, because steam coming out of the lid can cause burns.
-
Move the kettle only by holding it by the handle.
-
Never fill kettle above MAX level and below MIN level. It may cause damage to the kettle.
-
Never switch on a kettle without water.
-
Never use the kettle without a filter or with an open cover (automatic shutdown will not work).
-
Descale your kettle regularly. Using a kettle with a heating element covered by scale may cause damage.
-
Do not use aggressive detergents to wash the kettle housing – they can damage the kettle or remove the markings.
-
The device is not designed to work with external schedulers or separate remote control systems.
-
Do not wash the base of the kettle directly in the water, just wipe with a dry cloth.
-
Children aged 3 to 8 years old can enable and disable the device only when it is in its normal position of use, they are supervised or instructed on the safe use and understand the resulting risks. Children aged 3 to 8 years old can not connect devices, operate, clean, or maintain.
DESCRIPTION
- – housing
- – ON / OFF switch
- – indicator lamp
- – handle unlock
- – the lid
- – handle
- – lid unlock
USING THE ELECTRIC KETTLE
BEFORE FIRST USE: Fill up the kettle with water, boil and pour. Repeat three times. To remove the possible scent of the manufactory, please boil a few times water.
- Fill the kettle with water. Make sure that the heating plate is fully immersed in water.
- Place the appliance on the flat, even, and heat-resistant surface.
- Plug the kettle to the 220-240V ~50/60Hz mains, press the ON/OFF switch. An indicator lamp will light.
- After the water boils, the kettle will automatically stop boiling water, it is necessary to move the switch (2) from position I to position O.
- Before taking the kettle out of the base make sure it is switched off.
- The kettle can manually be switched off at any time by an ON/OFF switch.
- Keep the lid closed during the boiling process. Or the kettle won’t automatically switch off.
- After boiling, the time is demanded the thermostat to be ready in 2 minutes. After this time kettle can be switched on again.
- Regularly remove limestone sediment inside the kettle. Sediment may cause overheating of the kettle, shorten the life cycle and cancel the guarantee. Use mixings available in household stores or apply citric acid.
- Switching an empty kettle, or with an insufficient level of water, will cause automated switching of the kettle. Wait till cool down the kettle, pour enough water, and after a few minutes switch the kettle on.
- The kettle is an electrical device and it is not designed to hold water or other liquids. After boiling, the water must be immediately poured into another bowl. The water in the kettle after boiling can not stay longer than 10 minutes. Before each use, fill the kettle with fresh water above the minimum and below the maximum level.
- Do not leave the kettle turned on unattended. Always remove the plug from the socket after use.
CLEANING OF MAINTENANCE
Regularly descale the kettle. Descaling doesn’t belong to guarantee service. Lack of regular descaling causes damage to the elements of the appliance and cancels the warranty of the product. Use descaling mixture to descale the kettle.
TECHNICAL DATA:
Capacity max: 0,5 L
Voltage: 220-240V ~50/60Hz
Power: 750W
****To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. The used appliances should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance in the common waste bin.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>