camry CR 1149 Suitcase Turntable User Manual
- June 6, 2024
- camry
Table of Contents
**CR 1149
**
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ
CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial
purposes.
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 100-240V, ~50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
-
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc.. Never use the product in humid conditions.
-
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
-
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
-
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
-
Never use the product close to combustibles.
-
Do not let the cord hang over the edge of a counter or touch hot surfaces.
-
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
-
In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA.
Contact a professional electrician in this matter. -
If the device utilizes a power adaptor, do not cover it, because this can cause a dangerous temperature rise and can damage the device. Always connect the power adaptor cable to the device, and then connect the power adaptor to the power socket.
DESCRIPTION OF THE DEVICE
1. Cover the turntable
3. Earphone jack
5. LINE IN
7. Latches
9. Adapter for plates 45rpm
11. Lock of the turntable arm
13. Turntable arm
15. Needle protector| 2. Power LED
4. ON / OFF / Volume regulation
6. LINE OUT
8. Power adapter jack
10. Lever
12. Regulator of the speed of rotation
14. Switch AUTO-STOP
16. Power adapter
---|---
PLAYBACK OF VINYL DISCS
Prior to the first use of the turntable, remove the turntable needle protector (15) and untie the knot protecting the turntable arm found next to the turntable arm lock (11).
- Release the turntable arm lock (11).
- Place the disc on the turntable plate. If necessary, use the adapter (9).
- Select the plate’s rotational speed (the rotational speed depending on the type of disc) by using the switch (12).
- Lift the turntable arm by using the lever (10). Gently slide the arm onto the track you want to listen to. Lower the needle arm using the lever (10).
- To stop playback of the disc, lift the turntable arm using the lever (10).
- After completion of playback of the disc lift the turntable arm using the turntable lever (10). Move the arm over the lock (11) and lower it using the lever (10).
- To turn the AUTO-STOP function on or off using the AUTO-STOP switch (14).
TECHNICAL DATA:
Power supply: 100-240V ~ 50/60Hz
Min. music power: 2 x 0.4 W
****To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. Used appliances should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance in the common waste bin.