TAKSTAR MS800 Wired Cardioid Conference Microphone Maximum elevation angle of 50° for large report and public address User Manual
- June 6, 2024
- TAKSTAR
Table of Contents
TAKSTAR MS800 Wired Cardioid Conference Microphone Maximum elevation
angle of 50° for large report and public address
Preface
Dear Customer,
Thank you for purchasing TAKSTAR MS800 Conference Microphone. Please read the
user manual carefully before use and keep it for reference in future. If you
have any questions or suggestions, please contact our local dealer.
Features
- Sound collecting tube, 20-80 cm of pickup range, long-distance pickup 0 Cardioid pickup pattern to effectively reduce ambient noise
- Three levels of adjustable gain flexibly configured according to the on-site situation
- Utilizes a short-handle design, with the combined casing of zinc/aluminum alloys, for a classic and premium look
- Maximum elevation angle of 50°, locking design added to the base joint, angle adjustment accurate and effective for a long time
- 48V phantom power, XLR connector for connecting to mixers, phantom power, etc.
- Radiofrequency interference (RFI) shielding technology to eliminate the noise caused by electromagnetic interference or cell phone interference
Product content
- Conference microphone 1 pc
- XLR cable 1 pc
- User manual 1 pc
Applications
Conferencing, broadcasting
Specifications
- Type: Back electret condenser
- Polar Pattern: Unidirectional
- Frequency Response: 60Hz-18kHz
- Sensitivity: -31dB±3dB (OdB=1V/Pa at 1kHz)
- Output Impedance: 1000±30% (at 1kHz)
- Operating Voltage:48V
- Net Weight: approx. 991g
Note: The data is tested by Takstar Laboratory, and Takstar has the final interpretation right!
Operation instructions
- ,CD Connect the microphone to the PA device via the XLR output cable, as shown in Figure 1.
- Turn the volume knob of the PA device to the zero position first, then turn on the power switches of the PA device and the microphone, and slowly increase the volume of the PA device until it is suitable.
- The gain is set as “0” by default. The automatic gain switch can be adjusted based on the on-site sound amplification for quick system setting. When the switch is turned to the “-10dB” position, the max SPL can be lowered to reduce popping sounds; when the switch is turned to the “10dB” position, long-distance pickup is enabled to increase the microphone sensitivity in picking up sounds.
- You should keep a proper distance of 20-80cm with the microphone when speaking.
Cautions
, CD Note : Feedback may occur when you cover the microphone head with
your hand or bring it close to the loudspeaker. In this case, please lower the
volume of the loudspeaker or adjust the pickup angle of the microphone to make
the microphone and the loudspeaker not face each other.
- The microphone has high sensitivity, so you must be careful not to drop it from a high place or give it a strong impact.
- When you don’t use the microphone, it should be stored in a tidy and clean place. Avoid storing the microphone in a place of high temperature and humidity, so as not to affect its timbre.
Safety instructions
In order to avoid possible personal injury or property damage caused by electric shock, high temperature, fire, radiation, explosion, mechanical hazards and improper use, please read and observe the following items carefully before using the product.
- If there is any abnormality (such as smoke, odor, etc.) during use, please turn off the power switch and unplug the power plug immediately, and then send the product to the dealer for maintenance.
- The product and accessories should be placed indoors in a dry and ventilated place. Do not store them in a humid and dusty environment for a long time. Avoid getting close to fire, rain, water, excessive collision, throwing, vibrating the machine and covering the ventilation holes during use, so as not to damage its function.
- When using the product, you must abide by the relevant safety regulations. Please do not use the product in the occasions that are clearly prohibited by laws and regulations to avoid accidents.
- Please do not disassemble, refit or repair the product by yourself to prevent personal injury. If you have any questions or service needs, please contact our local dealer for follow-up.
- If you use a phantom power supply to supply power, you should purchase and use a phantom power supply that has obtained CCC certification and meets the standard requirements.
Meaning of icons
This symbol indicates that according to the WEEE Directive (2012 / 19/ EU)
and national laws, this product should not be disposed of together with your
household waste, and should be returned to an authorized recycling station of
electrical and electronic equipment (WEEE) for recycling, because this type of
waste has potential harmful substances that may have a negative impact on the
environment and human health.
Meanwhile, when this product is disposed of properly, it is conducive to the
effective use of natural resources. For more information on where you can
place your waste recycling equipment, please contact your local City Office,
Waste Management Bureau or Household Waste Treatment Service Department
Milt: www.takstar.com
Guangdong Takstar Electronic Co., Ltd. Address: No. 2 Fu Kang YiRd., Longxi
Boluo Huizhou, Guangdong 516121 China
Tel: 86 752 6383644 Fax: 86 752 6383952
Email: sales@takstar.com
GB/T 14198-2012
Website: www.takstar.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>