MARK-10 MU100 Communication Adapter Instruction Manual
- June 6, 2024
- MARK-10
Table of Contents
MARK-10 MU100 Communication Adapter
MU100 Communication Adapter – USB Driver Installation Instructions
The MU100 communication adapter converts Mitutoyo signals into USB, typically
used for transmitting data from a Mitutoyo travel display on a Mark-10 test
stand to data collection software on a PC. Cable part no. 09-1066 is required
between the Mitutoyo device and MU100.
Follow these instructions to install the USB driver:
- Go to: mark-10.com/products/accessories/power-communication/communication-adapters/
- Under the Downloads section, click MU100 USB Driver (ZIP file).
- Extract the files, then run the USB Driver installer, “MU100_USB_Driver.exe”. Follow the instructions on the screens.
- After the installation completes, connect the MU100 to a USB port on the PC.
- Windows will assign a COM port number, viewable in Device Manager > Ports.
Mark-10 Corporation
www.mark-10.com
info@mark-10.com
Toll-free: 888-MARK-TEN
Tel: 631-842-9200
Fax: 631-842-9201
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>