SMANIA 3W Under-Cabinet LED Light Set Shinebright Instructions
- June 6, 2024
- SMANIA
Table of Contents
SMANIA 3W Under-Cabinet LED Light Set Shinebright Instructions
PACKAGE CONTENTS
- 5/8 × LED light
- Remote with mount
TECHNICAL SPECIFICATIONS
- Voltage: 4.5 V DC
- Power: 3 W
- Brightness: 150 lm
- LED power supply: 3 × AAA battery
- Remote power supply: 2 × AAA battery
- Light color: warm yellow/cold white (depending on model)
- Size: 89 × 89 mm
COMPONENTS
- ON/OFF button
- OFF button
- ON button
- Lighting modes
- Timer
- Remote battery compartment
- LED light battery compartment
HOW TO USE
- Take off the battery compartment covers of the lights and the remote. Insert 3 AAA batteries into each light and 2 AAA batteries into the remote. Mind the polarity.
- Close the covers and set the lights around your home.
Tip: If you wish to mount the lights on the walls or cabinets, you can do so by using doublesided adhesive tape or by using screws. There are two holes on the battery compartment covers of the lights, that allow you to screw them to walls. The same goes for the remote control mount that is included in the package.
- Use the ON/OFF buttons on the lights to turn them ON or OFF individually.
- The remote turns all lights ON and OFF when using the two respective buttons (2, 3).
- Use the lighting modes button on the remote to dim the lights. There are 2 lighting modes – dim and bright.
- By pressing the timer button, you will turn ON the lights, but they will automatically turn OFF after 30 minutes.
WARNINGS
- Keep away from heat and moisture.
- Turn OFF when not in use.
- Only use the product for its intended purpose.
- Do not disassemble or modify in any way.
- Only suitable for indoor use.
WARRANTY
The warranty is valid for 24 months. You can claim it from DFVU d.o.o.,
Liparjeva 6a, 1234 Mengeš, Slovenia, for a replacement product or a refund.
Send us your order number and purchase date in the email, which is available
by clicking on our logo in the bottom right corner. The product has a lifetime
of 24 months from the date of collection.
WEEE disposal and recycling symbol. The WEEE symbol is attached to the product in compliance with the EUdirective 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). It is intended to deter the improper disposal of this product and to promote reuse and recycling.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>