Smania LED Car Foot Light Discodots Instructions

June 3, 2024
SMANIA

Smania LED Car Foot Light Discodots

-.LED-Car-Foot-Light-Discodots-product

PACKAGE CONTENTS

  • 4 light bars
  • Remote
  • Adapter
  • USB power cable
  • 4 connecting cables
  • 8 Velcro strips
  • Instructions

TECHNICAL SPECIFICATIONS

  • Input voltage: 5 V
  • Remote power supply: 1 CR2025 battery
  • Size: 13.1 × 2.9 × 0.8 cm
  • Power: 3.2 W
  • Casing material: plastic
  • Weight: 300 g

SETUP

Light bars are installed underneath the dashboard on both the drivers and passenger side as well as underneath the seats to light up the back row of your car (see the picture below).

  • Take 4 Velcro strips and paste them on the back side of 4 light bars.
  • Use 4 connecting cables to connect light bars with the adapter.
  • Take the other 4 Velcro strips and paste them on the areas in your car where you want to install the light bars (underneath the dashboard and seats).
  • Attach the connected light bars on Velcro strips.
  • Hide the cables inside the seat pads so that they don’t disturb you during driving.
  • Finally, connect the adapter with the USB port in your car using the USB power cable.
  • The DiscoDots lights are now ready to use.
  • Use the included remote to control the lights.

For a pictorial representation of the installation, see the images below.

REMOTE CONTROL

  1. ON/OFF button
  2. Reset
  3. Red
  4. Blue
  5. Green
  6. Yellow
  7. Purple
  8. Ice blue
  9. White
  10. 7-color cycle mode
  11. Breathing mode
  12. Sound-activated mode 1
  13. Sound-activated mode 2
  14. Sensitivity enhancement
  15. Sensitivity reduction

NOTE: Before you use the remote for the first time, pull out the plastic battery protector.

WARNINGS
  • Do not look directly into the lights. This might cause eye damage or even blindness.
  • This product is intended for indoor use. Do not install the lights on the outside of your car.
  • Store in a dry and dark place. The device can be damaged by water or moisture.
  • Keep away from open flames and heat.
  • This is not a toy. Keep away from children.
  • Do not disassemble or modify in any way.
  • Only use the product for its intended purpose.
  • Before each use, check if the light has any visible damage or defects. Do not use it if damaged.
  • Only use the included adapter and cables.

WARRANTY

The warranty is valid for 24 months. You can claim it from DFVU d.o.o., Liparjeva 6a, 1234 Mengeš, Slovenia, for a replacement product or a refund. Send us your order number and purchase date in the email, which is available by clicking on our logo in the bottom right corner. The product has a lifetime of 24 months from the date of collection.

WEEE disposal and recycling symbol. The WEEE symbol is attached to the product in compliance with the EU directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). It is intended to deter the improper disposal of this product and to promote reuse and recycling.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals