Fontastic 255625 Party II Wireless Speaker User Manual

: June 6, 2024
: fontastic

Table of Contents

Package contents
Overview
Getting Started
Switching On /Off
Pairing
Music Streaming
Play music from a memory card or USB storage medium
FM Radio
Technical data:
Safety Warnings:
Registration and Safety
Note on environmental protection:
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Wireless Speaker PartyII

User Manual

Thank you for choosing a Fontastic® Product. Please read this user manual carefully and comply with the safety instructions.

Package contents

Wireless Speaker Fontastic ®
Micro-USB Charging Cable
Audio Aux cable
User Manual

If any of the above pieces are missing, please pack the product again and return it to the dealer.

Overview

Speaker
Panel
LED Light
On/Off Button, turnable
AUX In
Micro USB Connector
Next Track / Volume +
Multifunction Button
Start/Stop Button
Previous Track / Volume –
TF Slot
Display
USB Connector
LED
Microphone Connector

Getting Started

Charging the battery
Fontastic® PartyII is equipped with an internal, rechargeable lithium-ion battery. Connect the Micro-USB Cable included with it with the Micro-USB charging port (5) of the Fontastic ® PartyII. The cable can be connected to a computer or a standard USB power adapter.
The red LED (14) of the speaker lights up while charging. The standard charging time is 2-3 hours. The red LED (14) turns off when the speaker is fully charged.
The cable can be disconnected.

Note: Charge the speaker for at least 2.5 hours before initial use.

Switching On /Off

To turn on the speaker, turn the On/Off button(4) right (ON), or left (Off).

Pairing

The speaker must be connected to a Bluetooth® device to wirelessly transfer and output audio files. Turn on the speaker by sliding the On/Off Button (4) to the right (ON).

Search your Bluetooth® device from which you want to play the audio files for Bluetooth ® audio devices (Bluetooth from the audio source must be activated).
The party speaker should be listed.
Select the speaker „PartyII“ to pair. You should now be connected to the Fontastic ® PartyII speaker. A beep tone sounds for confirmation.

Note: If the connection with the device is lost or the device temporarily disconnects, Fontastic ® PartyII automatically tries to restore the connection.

Multifunction Button
In order to change the play mode from Wireless Music streaming, USB, TF card or FM Radio Mode, please press the Multifunction Button (8) to get in to the desired music streaming mode.

Speaker LED Light Control
Press and hold the Multifunction Button (8) for a few seconds to Switch on or off the LED Light of the Speaker system.

Music control
To play or stop the music, press the Start/Stop Button (9). To skip to the previous track, press the — BWB (10).
To skip to the next track Press the + / FFW(7).

Volume Control
The On/Off button (4) supports the Volume Control system of the Fontastic0 Party. Besides this, you can adjust the volume by pressing and holding the Next Track or Previous Track Button (7,10) to reach the desired Loudness (in Display you can see the Volume Level 0 to 30 ).

TWS (wirelessly connection between two Fontastic Party Speakers)
Close the Bluetooths mode of your Streaming source such as your Mobile phone. Switch on both Party Speakers at the same time.

Press and hold the Start/Stop Button (9) of one of the Speakers for a few seconds.
The party Speakers will connect with each other wirelessly. In order to connect your Bluetooth® source with Party II, please follow the Pairing procedure.
Once the PartyII Speakers are paired with each other and Mobile phones, they will connect to each other and smartphones automatically.

Music Streaming

Music wirelessly
When paired with a device, press the Start/Stop Button (9) to start the Music Streaming.
Press the Start/Stop Button (9) once more to pause the Music streaming.
Note: The device must support the A2DP profile for music streaming and the AVRCP profile for the music remote control.

Play music from a memory card or USB storage medium

Insert a Micro-SD memory card with audio files into the TF slot (11) or USB memory of the Fontastic PartyII (13). Select by pressing the Multifunction Button (8) to start the memory card or USB-Flash Play Mode. The files stored on the media will start to play.

FM Radio

Press the Multifunction Button (8) to switch to radio mode. If you press the Start/Stop-Button (9) the speaker will scan the FM bandwidth for suitable radio stations and bookmark them.
Once the search is finished, the speaker will play the last found station and you can switch between stations with the forwards and backward buttons (7,10).

Technical data:

BT V 4.2 + EDR
Profiles: A2DP, AVRCP
USB Socket / TF-Card slot
Speaker: 6.5″ Diameter, 10 Watts
Microphone Socket
Charging Status LED: Red/Blue
Power input: 5V DC
Micro USB charging port
Rechargeable and protected 1200 mAh Battery
Operating time: 1-3 hrs.
Material: PP
Dimensions: 250 x 160 x 360 mm (LxWxH)
Weight: 1.45 Kg

Safety Warnings:

Do not open the device
Do not hold the device underwater
Keep it safe from humidity
Do not connect the adapter to the device by using force
Keep the device away from children
Disconnect electronic devices from the power when not using them for a longer time.
Do not use the device when it has visible defects.

In case you need technical support, please contact our support team by e-mail under servicefantastic .eu.

Registration and Safety

Certification/General Information
We hereby declare that this device carries the CE mark in accordance with the regulations and standards. It conforms with the fundamental requirements of the (RED) 2014/53/EU, as well as the RoHS 2 2011/65/EU directive. The full text of the EU declaration of conformity is available at the following internet address:
www.d-parts.de/Konfo

Note on environmental protection:

After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale.
Details of this are defined by the national law of the respective country. This symbol on the product, the instruction manual, or the package indicates that a product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

Fontastic, by D-Parts GmbH
● Birkenweiherstr, 16
● 63505 Langenselbold,
Germany / V2_01_22