Aerpro CHFO7C Steering Wheel Control Interface Owner’s Manual

CHFO7C
Steering Wheel Control Interface
for select Ford vehicles

CHFO7C Steering Wheel Control Interface

Vehicle Application

Ford Ranger 2012>
Ford B-Max 2012>
Ford Kuga 2013>
Ford Fiesta (JA8, US & Euro Models) 2012>
FordC-Max (DXA) 2010>
Ford Focus (DYB) 2011>
Ford TransitCustom (FCC, Not Euro 6) 2012 – 2016
Ford Escape 2013>
Ford Ecosport 2013>
Ford TransitConnect 2013>
Ford Taurus 2008 – 2012
Key Features

• RetainsSteering Wheel Controls(if equipped)
• RetainsTime/Date Change
• Retains Parking SensorAudio
• ProvidesSpeed Pulse,Park Brake, Reverse Gear, Antenna Remote & Illumination

The information provided in this document is subject to change without notice due to changes and/or improvements to the product/s.

ABOUT THIS PRODUCT

CHFO7C
CAN-BusSteering Wheel Control Interface for Ford vehicles. Retains steering wheel controls, parking sensoraudio and allowstime/date change from the steeringwheel.

WIRING COLOUR CODES

Purple
Purple/Black
Green
Green/Black
Grey
Grey/Black
White
White/Black| Right Rear Speaker +
Right Rear Speaker –
Left Rear Speaker +
Left Rear Speaker –
Right Front Speaker +
Right Front Speaker –
Left Front Speaker +
Left Front Speaker –| Yellow
Black
Red
Orange
Green
Pink
Purple/White
Blue/White| Permanent 12V
Ground
Ignition 12V
Illumination
Park Brake
Speed Pulse
ReverseGear
Antenna Remote
---|---|---|---

PRIOR TO INSTALLATION

Read the manual prior to installation. Technical knowledge isnecessary for installation.Theplace of installationmust be free of moistureand away from heat sources.Pleaseensure that the correct tools are usingduring the installationto avoid damage to the vehicle or product. Aerpro can not be held responsible for the installation of thisproduct.

TECHNICAL SUPPORT
If you need assistance setting up or using your Aerpro product now or in the future, call Aerpro Support Australia
TEL: 03 – 8587 8898 FAX: 03 – 8587 8866 Mon-Fri 9am – 5pm AEST. If you would like to download a digital copy of this manual, or other Aerpro manuals/software, please visit the http://aerpro.com website.

FITTING GUIDE

1. Remove and disconnect the original head unit.

2. Connect the 12 way mo l ex connector of the head un i t patch l ead (supp l i ed separately) to the interface.

3. Connect the opposi te end of head un i t patch l ead to the head un i t steeri ng wheel control input on the back of the aftermarket head unit.
   NB:Thismay be a 3.5mm jack plug or a wire input depending upon the head unit brand being fitted. Pleasesee the head unit installationmanual for further information on where to connect.
   Important: Thisstepmust be completed before connecting power to the interface. Failure to so do may result in no steering wheel control function.

4. Connect the 14 way molex connector to the interface

5. Connect the male power/speaker ISOharnessto the female power/speaker ISOharnessfrom the aftermarket head unit. For aftermarket head unitswithout an ISO connector, please refer to “Wiring Colour Codes” on Pg.2.

6. Connect the female vehicle specific connectorson the harnessto the male vehicle connector from the vehicle.

7. Connect the ch i me speaker box to the loom via the 4 pin connector and the red/ white RCA connectorsto the stereo Aux Input.

8. Remove the car displayconnector from the vehicle and plug into the interface (please remove the dust cover from the interface before making the connection).

9. Connect the display connector from the loom to the vehicle (the port previously occupied by the car display connector, removed in Step 8.)

Testhead unit for correct operation.

STEERING WHEELCONTROL FUNCTIONALITY

Original Button
Volume +
Volume –
Track +
Track –
Speech| Function
Volume +
Volume –
Track +
Track –
Mute
---|---

SETTING THETIME/DATE

1. PressSpeech to turn on the vehicle display
2. Pressand hold Speech for two secondsto enable menu mode
3. PressVolume +/- to navigate to the clock setting menu option and pressSpeech to confirm selection
4. Adust the time using Volume +/- and pressSpeech to confirm
5. Follow the same processto adjust the date
6. Once time and date have been set,pressSpeech to confirm

NB:Themenu option will time out after 15-20secondsof inactivity

www.aerpro.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>