logitech Pop Combo Mouse and Keyboard Installation Guide
- June 6, 2024
- Logitech
Table of Contents
logitech Pop Combo Mouse and Keyboard Installation Guide
logitech Pop Combo Mouse and Keyboard Installation Guide
SETTING UP YOUR MOUSE AND KEYBOARD
-
Ready to go? Remove pull-tabs.
Remove the pull-tabs from POP Mouse and the back of POP Keys and they will automatically switch on. -
Enter Pairing Mode
Long press {that’s about 3 seconds) the Channel 1 Easy-Switch key to enter Pairing Mode. The LED on the keycap will start blinking. -
Enter Pairing Mode
Press the button on the bottom of your mouse for 3 seconds. The LED light will start blinking.
-
Get your POP Keys connected
Open Bluetooth preferences on your computer, phone or tablet. Select “Logi POP” on the list of devices. You should see o PIN code appear on screen.
Type that PIN code out on your POP Keys then press the Return or Enter key to finish connecting. -
How to connect your POP Mous e
Simply search for your Logi POP Mouse on your device’s Bluetooth menu. Select, and-ta-da!-you’re connected. -
Is Bluetooth not your thing? Try Logi Bolt.
Alternatively, you con easily connect both devices using the Logi Bolt USB receiver, which you’ll find in your POP Keys box. Follow simple Logi Bolt pairing instructions on Logitech Software (which you can download in a flash at )Qgitech.com/pop-download
MULTI-DEVICE SETUP
-
Want to pair with another device?
Easy. Long press (3-ish seconds) the Channel 2 EasySwitch Key. When the keycap LED starts blinking, your POP Keys is ready to pair to a second device via bluetooth
Pair to a third device by repeating the same thing, this time using the Channel 3 Easy-Switch Key. -
Tap between devices
Simply tap the Easy-Switch keys (Channel 1, 2, or 3) to move between devices as you type. -
Select a specific OS Layout for your POP Keys
To switch to other OS keyboard layouts, long press the following combinations for 3 seconds: -
FN and “P” keys for Windows/Android
-
FN and “O” keys for macOS
-
FN and “I” keys for iOS
When the LED on the corresponding channel key lights up, your OS has been successfully changed .
HOW TO CUSTOMIZE YOUR EMOJI KEYS
-
Download Logitech Software to get started
Ready to get playful with your emoji keys? Download Logitech Software from !Qgitech.com/pop-download and follow the easy installation instructions. Once the software is installed, your emoji keys are good to go.
*Emojis ore currer-itly supported on Windows and macOS O”lly. -
How to swap out your emoji keycaps
To remove an emoji keycap, firmly grip it and pull it vertically. You’ll see a little’+’ shaped stem beneath.
Choose the emoji keycap you want on your keyboard instead, align it with that little ‘+’ shape, and press down firmly -
Open Logitech software
Open Logitech Software (making sure your POP Keys is connected) and select the key you want to reassign. -
Activate the new emoji
Select your favorite emoji from the suggested list, and get your personality popping in chats with friends!
HOW TO CUSTOMIZE YOUR POP MOUSE
-
Download Logitech Software
After installing Logitech Software at J.Qgitech.com/pop-download. explore our software and customize the top button of POP i’,iouse to any shortcut you like. -
Change your shortcut across apps
You can even customize your POP Mouse to be opp-specific! Just play around and make it your own.
FAQS
Can you pop out/ switch the other keys as well?
Yes! You can, but if you buy normal square key caps for the keyboard, beware that possibly all of them might not fit.
Is there a prnt scrn key? If not, how do i take screenshots?
No, there is no print screen in POP keys. However, to take screenshots in POP keys use Shift + Command + 4, then select the area you want to capture.
Are you going to make a pop keys with a numeric keypad? That is the only thing stopping me from purchasing.
we are not sure about it. However, we will take this as feedback and pass this to our team.
If download the Logitech software on my Mac, set up the emojis – will the emoji keys then work when connected to my iPad?
No, the Emoji key works on the device that has the Logi Options software.
Does this work with Linux OSes?
The Logitech POP Keys are not compatible with LinuxOS. It is compatible only with Windows, mac, iPad, iOS, Chrome, Android Operating systems.
Will this work with a Promethean smart board?
If the smart board has bluetooth support then it will work with the below OS:
Windows® 10,11 or later
macOS 10.15 or later
iPadOS 13.4 or later
iOS 11 or later
Chrome OS
Android 8 or later
Would this work inside a virtual desktop?
No, the Pop keys will not work on a virtual desktop.
Can this be used on the ipad 7 generation ?
The Logitech POP Keys are compatible with iPadOS 13.4 or later.
Can you remove esc key and replace with custom keycap?
No, the esc key cannot be replaced with custom keys. Only the emoji keys are customizable,
Can this keyboard connect to a iPad mini 4
Logitech POP Keys is compatible with iPadOS 13.4 or later. Check out the OS specification of your device.
Can this be modded? The sound of the space bar could sound a lot better.
It’s possible to remap these keys to something more useful using Logitech’s software.
Is Logitech Flow supported?
Yes, Logitech POP Wireless Mouse and POP Keys Mechanical Keyboard Combo is compatible with Logitech Flow.
Is this a full-size keyboard?
No, the Logitech Pop keys is a full-size keyboard.
Does the mouse work on a glass ?
Yes
Is the battery percentage shown on MacOS?
The POP Keys battery percentage does not show up on MAC OS. You can see the battery level in the options software.
is this compatible with Apple products like the Ipad mini?
Yes, is compatible to any device with Bluetooth
Is this keyboard compatible with Logitech gaming software /g hub?
No, POP keys keyboard is not compatible with Logitech gaming software /g hub.
Good for speedy typists?
No, Pop keys do not have option for speedy typists.