feyree FR-MS2-1P16A-02 Level 2 EV Charger for Car with NEMA 6-20 Plug User Manual
- June 16, 2024
- feyree
Table of Contents
feyree FR-MS2-1P16A-02 Level 2 EV Charger for Car with NEMA 6-20 Plug
Safety Precautions
Thank you for purchasing and using the free mode II charger. It is recommended to read this manual before use
CAUTION
CAUTION: This symbol indicates what the user should pay attention to.
Improper operations can lead to user security issues or a degree of hardware
damage.
WARNING
CAUTION: This symbol indicates what the user should pay attention to.
Improper operations can lead to user security issues or serious hardware
damage.
CAUTION!
- Do not immerse the AC charging connection device in water
- It is forbidden to step on the charging cable, pull the cable, bend or knot the cable
- Do not drop the control box or press heavy objects on its surface
- It is strictly forbidden to place the equipment near objects that will produce high temperatures during charging
- The operating ambient temperature of the equipment shall not exceed -30 °C ~ +55 °C
WARNING
- Do not use the device when the charging line is damaged
- Only for electric vehicle charging
- This product must be well-grounded when used
- Do not use external wires or adapters
- Never put your fingers into the charging plug
- This product does not contain user-maintainable parts. Please do not attempt repair and maintenance by yourself
- If the device cannot be charged normally according to the operation manual, please contact the seller or replace it
Precautions
WARNING
- Ensure the power plug and socket are consistent before charging
- Do not charge if the socket is damaged, rusty, cracked or the connection is too loose
- If the socket is dirty or wet, please cut off the power first. Wipe the plug with a dry and clean cloth to make sure the charging plug is dry and clean
- Ensure the charging connector, cable connected to the control and plug surface are not scratched, rusty, broken or damaged, and other abnormal conditions
To guarantee the service life of the charging cable and reduce the risk of use, if the charging box is charged with the cable over a long distance Electric box (10m), users should pay attention to:
CAUTION
- When charging in crowded places, users should lay the cable horizontally as far as possible
- If the cable length is too long, avoid pulling the cable
- The cable shall be placed on a flat road without sharp gravel and glass fragments
- Avoid using in corrosive liquid, flammable dust and strong corrosive environment
- When crossing road sections in public passages or outdoors, bridges or underground crossing passages shall be built, especially to prevent repeated rolling by heavy vehicles
- The cable itself is heavy, and vertical suspension shall be avoided as far as possible. It is easy to be affected by wind, and long-term swing vibration and reduces the service life of the cable
Charging box description
Control box functions
- Earth leakage protection
- Over-volta age and undervolta ge protection
- Lightning protection
- Over-current protection
- Overheat protection
- Grounding protection
- Overload protection
- OLEO display: low-temperature resistant environment
Product performance
- Insulation resistance: >10000
- Terminal temperature rise: <50K
- Mechanical life: no-load plugging times> 10000 times
- External impact: ca n withstand a 1-meter drop and 2 tons of vehicle crushing
- Aluminium alloy body: provides excellent heat insulation performance
- Pin: copper alloy, silver plated
Charging box description
WARNING: The device cannot adjust the current during charging.
Description of display area
Other matters
Note: The control box rated current under 1 OA can use 1 OA socket otherwise over 1 OA must be used 16A socket
-
Firmly insert the power plug into the outlet
WARNING: Ensure the power-supply side outlet complies with CEE 7-Std standard -
Pull the cap lightly, insert the charging connector completely into your vehicle’s outlet
WARNING: Make sure the plug is fully inserted into the socket until you hear a “click”