SCANGRIP 03.6104C Vega 4 Connect Non-Blinding Work Light Instructions

: June 8, 2024
: SCANGRIP

Table of Contents

03.6104C Vega 4 Connect Non-Blinding Work Light
BATTERY, CHARGER, CONNECTORS AND POWER SUPPLY ARE SOLD SEPARATELY
MANUFACTURER’S WARRANTY
Documents / Resources

03.6104C Vega 4 Connect Non-Blinding Work Light
Instructions SCANGRIP 03.6104C Vega 4 Connect Non-Blinding Work
Light **3 years warrnty***

03.6104C Vega 4 Connect Non-Blinding Work Light

JUST CONNECT
Add the connector matching your battery pack SCANGRIP 03.6104C Vega 4
Connect Non-Blinding Work Light - fig 4

BOSCH
BOSCH GREEN
DEWALT
EINHELL
FEIN
FESTOOL
FLEX
HAZET| HIKOKI
INGERSOLL
MAKITA
MILWAUKEE
RIDGID
SNAP-ON
WÜRTH
---|---

* go to scangrip.com to register

SCANGRIP 03.6104C Vega 4 Connect Non-Blinding Work Light - fig
5

BATTERY, CHARGER, CONNECTORS AND POWER SUPPLY ARE SOLD SEPARATELY

SCANGRIP CONNECTORs for 18V battery packs SCANGRIP 03.6104C Vega 4
Connect Non-Blinding Work Light - fig 4

BOSCH – 03.6140C
BOSCH GREEN – 03.6141C
DEWALT – 03.6142C
EINHELL – 03.6143C
FEIN – 03.6144C
FESTOOL – 03.6153C
FLEX – 03.6145C
HAZET – 03.6146C| HIKOKI – 03.6147C
INGERSOLL – 03.6152C
MAKITA – 03.6148C
MILWAUKEE – 03.6149C
RIDGID – 03.6154C
SNAP-ON – 03.6151C
WÜRTH – 03.6150C
---|---

Accessories

SCANGRIP 03.6104C Vega 4 Connect Non-Blinding Work Light - fig
3 | POWER SUPPLY
03.6123C
---|---
| CAS BATTERY
18V 5.2 Ah
03.6121
| CAS CHARGER
03.6122

VEGA 4 CONNECT
WARNING

Always respect applicable legislation for working with electrical equipment in order to reduce the risk of accidents.
Avoid looking directly into the beam of light, as this will result in dazzling.
Do not use the lamp near a naked flame.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced

BATTERY COMPLIANCE

The lamp is designed to be used with 18V Metabo CAS batteries.
The lamp is also compatible with 3rd party 18V batteries by using the SCANGRIP CONNECT system
It is possible to use a SCANGRIP POWER SUPPLY instead of a battery.

The lamp has two different IP ratings depending on the use:

IP54 when used with a SCANGRIP POWER SUPPLY.
IP30 when used with a CAS Battery.

Discarded electrical products must not be disposed of together with household waste. Please use recycling facilities. Ask your local authority or retailer for advice on recycling.

MANUFACTURER’S WARRANTY

– Information for customers in Australia and New Zealand only
This SCANGRIP product is guaranteed for a period of 2 (two) years from date of purchase. This guarantee shall become invalid if the product has been misused, tampered with or accidentally damaged.
If the product is defective, we undertake to repair or replace the product or any part of it that is defective; or wholly or partly recompense you if they are defective. This guarantee is in addition to other rights and remedies available to consumers, all of which are given by us to you if you are a consumer. Our goods come with guarantees that cannot be excluded under the Australian or New Zealand Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any ther reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
If you wish to make claim, please return this product to the original place of purchase together with your purchase receipt or go to our website www.scangrip.com and fill out the claim form.
DESIGNED BY SCANGRIP IN DENMARK

SCANGRIP.COM http://QRly.me/packaging- manuals/qr/03-5451-vega-1500-c-r-manual-1
V2/20.04.2022/kks
// SCANGRIP A/S Rytterhaven 9 DK-5700 DENMARK

Documents / Resources

| SCANGRIP 03.6104C Vega 4 Connect Non-Blinding Work Light [pdf] Instructions
03.6104C, Vega 4 Connect Non-Blinding Work Light, Non-Blinding Work Light, Vega 4 Connect Work Light, Work Light, Light, Vega 4 Connect
---|---