Hytera HP60X/HP68X Digital Portable Radio User Guide
- June 6, 2024
- Hytera
Table of Contents
HP60X and HP68X Digital Portable Radio
Quick Reference Guide
Product Layout
LCD Icons
| Icon | For Radio Status |
|---|---|
| More bars indicate more remaining battery power. | |
| The battery power runs out. Recharge or replace the battery. | |
| The radio detects no signal. | |
| The number of bars indicates the signal strength. | |
| The radio operates in low power mode. | |
| The radio operates in high power mode. | |
| The radio is scanning. | |
| The radio is operating in emergency mode. | |
| The BT feature is enabled | |
| A BT device is connected. | |
| The Location feature is enabled, and the radio receives valid positioning |
data.
| The Location feature is enabled, but the radio does not receive valid
positioning data.
NOTE
- For details about the programmable keys, contact your dealer.
- Figures in this guide are only for reference.
Status Indications
LED Indicator
| LED Indicator | Radio Status |
|---|---|
| Flashes green | The radio is being turned on. |
| Glows green | The radio is receiving. |
| Glows red | The radio is transmitting. |
| Flashes orange slowly | The radio is scanning or roaming. |
| Flashes orange rapidly | The radio is operating in emergency mode. |
| Glows orange | Call hang time: No voice is being transmitted or received during |
a call. Within such a period, you can press and hold the PTT key to speak.
Flashes blue once every 3s| The BT feature is enabled, but no BT device is
connected.
Flashes blue once every 1.5s| A BT device is connected.
Flashes blue once every 0.1s| The BT feature is being disabled.
Basic Operations
Charging the Battery
**CAUTION**
- Use the approved charger to charge the battery.
- Read the Safety Information Booklet before charging.
Before initial use, use the charger to charge the battery alone or the battery attached to the radio. For details of the charging status, refer to the label at the bottom of the charger.
Using the Keypad (HP68X Only)
- To lock or unlock the keypad, on the home screen, press the OK/Menu key, and then press .
- To enter the content or edit messages, do any of the following:
» To switch the input method between alphabetic mode and numeric mode, press .
» To enter special characters, press in alphabetic mode.
» To enter a space, press mode. in alphabetic
Selecting a Zone
- Press the preprogrammed Zone Up or Zone Down key.
- Go to Menu > Zone to select a zone. This method applies only to HP78X.
Selecting a Channel
- Press the Smart Knob, and then rotate the knob within 5 seconds.
- Press the preprogrammed Channel Up or Channel Down key.
Call Services
To keep the audio quality, keep your mouth 2.5 centimeters to 5 centimeters away from the microphone.
Initiating a Call on Digital Channel
- Press and hold the PTT key. Go to Menu > Contact to select a contact, and then
- press and hold the PTT key. This method applies only to HP68X.
Initiating a Call on Analog Channel
- Call Without Signaling Press and hold the PTT key.
- Call with Signaling » Press and hold the PTT key.
» Press the preprogrammed One Touch Call key.
» Go to Menu > Contact to select a contact, and then press and hold the PTT key. This method applies only to HP68X.
Emergency
The Emergency feature is configured and enabled by your dealer. For details,
refer to the User Manual.
Hytera US Inc.
8 Whatney,
Irvine, CA 92618 949-326-5742
1363 Shotgun Road, Sunrise, FL 33326
954-846-1011
www.hytera.us info@hytera.us
(C) 2022 Hytera Communications Ltd. All rights reserved.| Hytera Canada
100 Leek Crescent, Unit 11
Richmond Hill, ON L4B 3E6
905-305-7545
www.hytera.ca info@hytera.ca
---|---