Hytera PNC360S Push-to-Talk Over Cellular Radio Instructions

June 5, 2024
Hytera

Hytera PNC360S Push-to-Talk Over Cellular Radio

Product Overview

Hytera-PNC360S-Push-to-Talk-Over-Cellular-
Radio-1

Before Use

Installing the Nano SIM Card

  1. Remove the battery cover with a proper tool.
  2.  Open the SIM card slot cover.
  3.  Install the SIM card.
  4.  Put the card slot cover back in place.

Attaching the Battery

Attach the battery as shown below, and then attach the battery cover back.

Attaching the Belt Clip

Attaching the Audio Accessory

Open the audio jack cover, and then insert the audio accessory into the jack .Hytera-PNC360S-Push-to-Talk-Over-Cellular-Radio-6

NOTE: To ensure optimum waterproof and dustproof performance, close the audio jack cover after disconnecting the audio accessory.

Charging the Battery

CAUTIONS

  • Use the approved charger to charge the battery.
  • Read the Safety Information Booklet before charging.
  • The remaining lithium-ion battery power is limited to 30% pursuant to the new lithium battery shipment regulation approved by the International Air Transport Association (IATA).

Before initial use, charge the battery.
To charge the battery, connect the product to a power adapter, power bank, or computer with the USB cable. To determine the charging status, check the battery icon shown on the LCD display.

Basic Operations

Turning on/off the Product

  • To turn on the product, long press for two seconds.
  • To turn off the product, long press for two seconds, and then select Power off.

Adjusting the Volume
To increase the volume, press the Volume + key. To decrease the volume, press the Volume – key.

Locking/Unlocking the Screen

  1. 1. To lock the screen, go to Settings > Screen locked to enable the feature. If the product is not operated for a specific duration, the screen will be automatically locked.
  2. 2. To unlock the screen, press

Connecting to the Network
To connect to the cellular network, install the Nano SIM card and activate the cellular data service.
Checking the Device Information
To check the information such as model, serial number, and version, go to Settings > About phone.

PoC Services

You can use Push-to-Talk over Cellular (PoC) services such as one-to-one or one-to-many voice call over the public network.

  • To initiate a call, do as follows.
    •  Select a contact.
    •  Press and hold the PTT key, and then speak.
    •  Release the PTT key.
  • You can receive a call without any operation.

Specifications

| Specifications
---|---
Model| PNC360S






Frequency Range

| l  FDD-LTE: B1/B3/B7/B8/B20/B28

l  TDD-LTE: B38/B40

l  WCDMA: B1/B3/B8

l  GSM: 900/1800

l  BT: BT4.2

l  WIFI: 2.4GHz, 802.11b/g/n20/n40

l  GPS: GPS/Galileo/GLONASS/BeiDou






Tx Power

| l  GSM900: 32.5dBm

l  DCS1800: 29.5dBm

l  WCDMA B1/B3/B8: 24dBm

l  FDD-LTE (B1/B3/B7/B8/B20/B28): 24dBm

l  TDD-LTE (B38/B40): 24dBm

l  BT: 3dBm

l  WIFI: 17dBm

Operational Temperature| ****

-20°C to +60°C

Battery Charging Temperature| ****

10°C to +45°C

Software Version| V1.0.01.000.02
Hardware Version| V1.00
Accessories| Adaptor, Belt Clip, Battery


Trademark

| ****
Adapter Model| S010WV0500200
Adapter Input| 100-240V~50/60Hz    0.4A
Adapter Output| 5.0V/2.0A


Battery Caution

| CAUTION

Risk of explosion if the battery is replaced by an incorrect type

| Specifications
---|---
| disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;

leaving a battery in an extremely high temperature surrounding environment that can result i n an explosion or the leakage of flammable liquid or gas;

a battery subjected to extremely low air pressure that may result in an explosion or the leaka ge of flammable liquid o gas

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals