SYNCO P2L Miniature 2-Person Digital Wireless Microphone System User Manual

: June 6, 2024
: SYNCO

Table of Contents

Caring For Your SYNCO Product
Package List
Product Instruction
Operations
Specifications
Warranty
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

SYNCO P2L Miniature 2-Person Digital Wireless Microphone System

Caring For Your SYNCO Product

Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.

Package List

Product Instruction

TX Transmitter

Power
Working Indicators
Built-in Mic
Contacts
Pocket Clip

RX Receiver

Vocal Effects/ Mono/Stereo
Type-C Port
Working Indicators
Connector
Contacts

Wireless Charging Case

Pairing/ Power Prompt
Type-C Por
Working Indicators
Contacts

Indicator — Transmitter (Double press the Power button to turn off light effect)

IndicWaotorkrsin(Wg hite Light) tWor(kindg

| Flash concurrently
| System unpaired
---|---|---
Illuminate sequentially(light effect on)
| System paired, normal working
Single light keeps on (light effect off)

Single light flashes
| Low battery
Indica ors Re Light)| Single light keeps on (in the case)
| Charging, and then turns off when fully charge

Indicator — Receiver

InWdoicrkainogrs (LWighhite)

| Flash concurrently
| System unpaired
---|---|---
Illuminate sequentially
| System paired
Single light keeps on & Illuminate sequentially
| Mono mode-Original sound
Single light flashes twice & Illuminate sequentially
| Mono mode-Vocal effects on
Stwinog-lwealiyght keeps on & Illuminate sequentially
| Stereo mode (Only original is supported)

Indicator — Wireless Charging Case

IndicatoWrso(rWkihnigte Light)

| Illuminate sequentially
| Pairing
---|---|---

Operations

Usage
① Tap on the right side of charging case to pop out the drawer
② Take the TX and RX out
③ TX should boot automatically as it leaved the case, and switch itself off automatically when returning to the case. (Forcible switch: Long press the Power button on TX for 3 seconds)
④ RX should boot automatically as it is plugged into smartphone
Pairing
① Place the TX and RX in the case with their contacts are connected with the case’s
② Long press the Pairing button on the case for 3 seconds with the drawer open
③ The indicators on the TX and RX should light up and illuminate sequentially when pairing is successful
Note: The transmi ter will automatically switch off if it is unpaired or disconnected for 5 minutes.
Charging
Charge the TX: Place the TX in the case with contacts connected with the case’s.
Charge the case: Connect the case with power supply via the charging cable.
Check the power
TX: Short press the Power button, the indicators will light up according to remain power for 5 seconds
Charging Case: Short press the Power Prompt button, the indicators will light up according to remain power for 5 seconds
Use vocal effects
Short press the Vocal Effects button on the receiver to switch sound effects: Original >> Studio FX >> KTV FX >> Voice Amplification >> EDM (Electronic Dance Music) >> Baby FX >> Male to Female >> Female to Male >> Monster FX.
Default effect: Original.
Note: The vocal effect will apply to both transmitters. In Stereo mode, only original is supported. Other vocal effects are unavailable.
Mono/ Stereo
Charging phone device
Plug your phone charging cable into the Type-C Port on the receiver.
In-Ear monitoring
Plug the included Type-C to 3.5mm Adapter into the Type-C Port on the receiver. Then plug in your headphones to realtime monitor mic recording and device’s backgrounding.
Note: The included Type-C to 3.5mm Adapter is exclusive, not available for other devices.

Specifications

TX Transmitter

Warranty

Warranty Period

Thank you for purchasing SYNCO products.

Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product.
Original SYNCO products are entitled to 12-month limited warranty service. The warranty period begins on the date of purchase of brand new, unused products by the first end-user.
Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).

Warranty Exclusions and Limitations

Faults resulted from inappropriate use of a product without following its operation specification
Artificial damage, e.g. crash, squeeze, scratch, or soaking
Modifications to a product by its user or a third party without prior written consent of SYNCO, e.g. replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certificate is altered or torn off
All consumable accessory attached to a product, like cable, wind muff, battery
Faults as a result of force majeure, such as fire, flood, lightning, etc.

Warranty Claim Procedure

If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO’s customer service through email at support@syncoaudio.com.
Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided.
If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.

Guangzhou Zhiying Technology Co., Ltd

Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones

WARRANTY CERTIFICATE

Please register your warranty. Meanwhile, you are welcomed to contact us via Email： support@syncoaudio.com

USER INFORMATION| Customer Name:
Phone Number:
Email
Address:
SALES INFORMATION| Sales Date:
Model:
Product Code:
Dealer:
REPAIR RECORD| Service Date:
Technician:
Issue:

****