camry CR 7810 Oil-Filled LED Radiator with Remote Control User Manual
- June 6, 2024
- camry
Table of Contents
camry CR 7810 Oil-Filled LED Radiator with Remote Control
SAFETY CONDITIONS
IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial purpose.
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 220-240V, ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
-
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
-
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
-
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
-
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
-
Never use the product close to combustibles.
-
Do not let cord hang over edge of counter or touch hot surfaces.
-
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
-
Never use this device close to water, e.g.: Under shower, in bathtub or above sink filled with water.
-
The heater should be placed on a level, heat-resistant surface, away (at least one meter) from flammable materials (lace curtains, curtains, wallpaper, furniture etc.).
-
The power cable should not be placed above the heater, and also should not touch or lie close to hot surfaces. Do not place the heater under an electrical outlet.
-
The surface of the heater can heat up to high temperatures of over 60 degrees C. Take care when near the heater.
-
Do not cover the heater with curtains, a towel or hang washing on it – this can damage the heater or cause a fire.
-
When using the heater, completely unwind its cable and make sure that the cable is not touching the hot surface of the heater.
-
Do not use the heater near basins, showers, sinks, pools or other places where it can get wet.
-
The device must be completely cool prior to storage. Keep the original packaging to store the heater in during non-heating seasons.
-
The heater is filled with a set amount of special oil. Repairs requiring opening of the oil container must be carried out only by the manufacturer or authorized representative, who should be contacted if oil leaks from the heater.
-
If disposing of the heater please follow rules of oil disposal.
WARNING: To avoid overheating do not cover the heater. -
Do not use this heater in the immediate vicinity of a bathtub, shower or swimming pool
-
Do not use this heater if it has been dropped
-
Do not use if there are visible signs of damage to the heater
-
Use the heater on a level and stable surface or attach it to the wall, if provided for by the manufacturer
WARNING: Do not use this heater in small rooms where there are people who
are unable to leave them by themselves, unless constant supervision is
ensured.
WARNING: To reduce the risk of fire, keep textiles, curtains or other
flammable materials at least 1 m away from the heater air outlet.
DESCRIPTION OF THE DEVICE
-
Carry handle
-
Safety power switch
-
Display:
A.– low power level indicator
B.– medium power level indicator
C.– high power level indicator
D.– heating mode indicator
E.– timer mode indicator
F.– power indicator -
Control panel:
G.– power button
H.– mode switch to select power level
I.– temperature increase button
J.– temperature decrease button
K.– timer switch -
Cord storage
-
Radiant ribs
-
Wheels
-
Remote control
ASSEMBLY
- Turn the heater upside down.
- Place the wheel bases between the first two ribs and end two ribs.
- Use the U-shaped clamp to hook the bases.
- Block the clamp by screwing on the butterfly nut.
- Place the heater on the wheels.
CAUTION: After turning the heater, wait at least one hour before connecting it to a power outlet
USING THE DEVICE
CAUTION: During first use of the heater a small amount of smoke may appear. This is normal.
-
Place the oil heater a minimum of 100 cm from walls, furniture, curtains, plants etc. on a flat and stable surface.
-
Make sure that all controls are set to off position. Connect the oil heater to mains power, press the power switch on (2) and then press power on button (G) to start operation, press both again to stop operation. To turn off the device, press the power button (G) and then press the power switch (2).
-
Power level setting
After power on the device press mode switch (H) on the control panel (4) to select desired power level low or medium or high by repeated pressing. The display (3) will light up indicator A or B or C. -
Temperature setting
The device has a thermostat which enables you to set the temperature from 15°C to 35°C. After setting the desired temperature on the display of the device, the heating element will remain on until the room temperature reaches the desired temperature. The thermostat will then cycle on and off to maintain the set room temperature.
Press buttons (I) or (J) on the control panel (3) or on the remote control (8) to set desired temperature in range 15°C – 35°C. The heating element comes on again when the room temperature drops below the desired temperature. -
Setting the timer
When the device is powered on. You can set the timer to switch off the appliance automatically after a certain period of time. Press the timer button (K) several times to set the desired power off time (between 1 and 12 hours from the time the function is set). The display will show 00 and start flashing on the screen. The function will activate once the timer icon stops flashing. The heating element will cycle on and off as per the set temperature setting and discontinue operation when the set time has run out.
CLEANING THE DEVICE
- Prior to cleaning always remove the plug from the electrical outlet.
- Prior to cleaning allow the heater to cool. Make sure that it is cool.
- Wipe the heater with a damp cloth, then wipe dry.
- Never use wax, shining agents or chemical agents to clean the heater. They may react with the device and cause discoloration or even damage.
TECHNICAL DATA
Power source: 220-240V~50/60 Hz
Power levels: ( low / medium / high)
CR 7812: 600W / 900W / 1500W – 7 ribs
CR 7810: 800W / 1200W / 2000W – 9 ribs
CR 7813: 1000W / 1500W / 2500W – 11 ribs
CR 7814: 1000W / 1500W / 2500W – 13 ribs
CR 7820: 1000W / 1500W / 2500W – 15 ribs
To protect your environment: please separate carton boxes and plastic bags and
dispose them in corresponding waste bins.
Used appliance should be delivered to the dedicated collecting points due to
hazarsous components, which may effect the environment. Electrical appliance
must be returned in order to reduce its reuse and utilization. If the device
contains batteries they should be delivered to dedicated points separatelly.