FLOS 102016 Glo-Ball S Suspension Lamp Instructions
- June 6, 2024
- FLOS
Table of Contents
FLOS 102016 Glo-Ball S Suspension Lamp
INSTRUCTION FOR CORRECT INSTALLATION AND USE
WARNING!
The safety of this fitting can only be guaranteed if these instructions are
observed, during both installation and use. Please retain these instructions
safety.
REMARKS:
-
When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
-
The appliance may in no way be modified or tampered with, any modification may compromise safety causing the appliance to become dangerous. FLOS declines all responsibility for products that are modified.
-
The symbol marked on the appliance indicates the need to use self-protected bulbs.
-
This appliance must be connected to an efficient grounding system in order to work safely and correctly.
-
The appliance must not be used without the glass diffusers; if they are broken or damaged, replace them immediately with original Flos spares.
-
Should the external trailing cable get damaged, it must be replaced by FLOS or by qualified personnel in order to avoid any danger.
-
The symbol shown on the device indicates that the product must be thrown out in a different manner than with the urban trashes.
-
Lighting fixture should be hanged only by the supplied steel cable.
-
If not familiar with electrical connections, contact a qualified electrician.
CLEANING INSTRUCTIONS
- Use only a soft cloth to clean the appliance, dampened with water and soap or mild cleanser if needed for resistant dirt.
- Warning: do not use alcohol or other solvents.
Pic.1E EUR
NOTE: Select and employ screw anchors which are suited to the surface
where the appliance is to be installed. 
| VERSION | Assembly Sequence |
|---|---|
| S1 EUR | Fig.1E – 2E – 3E – 4E – 5E – 6A – 7A. |
| S1 USA | Fig.1U – 2U – 6A – 7A. |
| S2 EUR | Fig.1E – 2E – 3E – 4E – 5E – 6B – 7B – 8B – 9B. |
| S2 USA | Fig.1U – 2U – 6B – 7B – 8B – 9B. |
TECHNICAL DATA
-
GLO-BALL S1 EUR
Incandescent halogen bulb MAX 150W, E27 attachment type HSGS. -
GLO-BALL S2 EUR
Incandescent halogen bulb MAX 250W, E27 attachment type HSGS. -
GLO-BALL S1 USA (UL Listed)
Incandescent halogen bulb MAX 100W, E26 attachment type T.
Incandescent halogen bulb MAX 150W, E26 attachment type T. -
GLO-BALL S2 USA (UL Listed)
Incandescent light bulb MAX 150W, E26 attachment type A.