alza APW-PHACCP08B Car Phone Holder User Manual

User Manual

Car Phone Holder ACC100
APW-PHACCP08B

THANK YOU FOR CHOOSING US!

We value your trust. We hope that you will be happy with our product, and as excited about it as we are. We try to offer products of the highest quality that satisfy even the most demanding requirements. If you are satisfied, it would make us very happy if you chose us again the next time you make a purchase. We are environmentally conscious, therefore we use special eco- friendly packaging. Please recycle!
Recycling and Environmental Protection
We try to avoid using plastic packaging and film and only use them when they are absolutely necessary to protect the product. So how are we different?
The packaging you can eat… Well, almost. 🙂
We use ink made from soybeans as opposed to classic petroleum-based ink.
The majority of our packaging is made from 100% recyclable paper.
We limit the use of adhesives. If absolutely necessary, we make sure to choose only water-soluble ones. We think globally, which means that we actively search for eco-friendly solutions. We keep an eye on trending technology and place the findings of the scientific community into practice. We don’t just try to meet quotas and mandates, we aim to exceed them.

TECHNICAL PARAMETERS

OVERVIEW

1. Ventilation grille holder with 4 positions for different grille widths
2. Locking lever
3. 360° Joint
4. Phone holder
5. Holder arms release button (on the back of the holder)
6. Tightening sleeve

INSTRUCTIONS

1. Insert the tightening sleeve (6) on the joint (3) with the thread towards the phone holder.
2. Snap the phone holder (4) onto the joint (3).
3. Adjust the holder (4) to the required angle and tighten the sleeve (6).
4. Insert the attachment into the grille (1) directly on the ventilation outlet and tighten as required using the lever (2).
5. To open the holder arms, press and hold the release button (5).
6. Insert the phone into the holder (4) and push the arms of the holder towards the phone.

Attention: Always remove the sleeve from the ventilation outlet before loosening the sleeve and changing the position of the holder, otherwise it may be damaged. If the ventilation grille does not hold the phone in the desired position, the lower edge of the grille can be used as support.

SAFETY INFORMATION

• Always pay attention to driving while on the road!
• Never install the holder near the airbag!
• Only use the product for the specified purpose of use.
• This product is not a toy. It may contain small components. Please keep away from children.
• Do not disassemble the product. Improper modifications can damage the product.
• Use a soft, clean, dry towel for cleaning the surface of the product.

WARRANTY & SUPPORT
Your new product is protected by our 24-month warranty, or extended warranty (if stated), which you can apply at any of our points of sale. For inquiries, you can use the contact form or one of our international call centers.
The use of the WEEE Symbol indicates that this product should not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider, or the shop where you purchased the item. This product meets all of the related ba-sic EU regulatory requirements. The EU declaration of conformity is available on www.alzashop.com/doc. This product sold in the European Union meets the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).

http://www.alzapower.com

Alza.cz, a. s., Jankovcova 1522/53,
170 00 Prague 7, Czech Republic © 2020
Alza.cz, a. s. All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>