BOYA BY-BMW700 2.4GHz Wireless Conference Microphone Instruction Manual
- June 6, 2024
- Boya
Table of Contents
BOYA BY-BMW700 2.4GHz Wireless Conference Microphone Instruction Manual
Thank you for purchasing BOYA!
BY-BMW700 is a ultimate boundary microphone system which consists of one
condenser microphone and USB wireless receiver.
Easy to set up and operate, it is ideal for video conference, seminars,
corporate events. The BY-BMW700 receiver can be connected to a desktop or
laptop computer. The transmitter can pick up sound source within 10m radius
range.
It produces a natural and clear sound for better recording experience.
Product Structure:
How to connect transmitter and receiver?
Before leaving factory, the connection of transmitters and receiver will be established.
If transmitters and receiver disconnect, please follow below steps:
- Turn on the receiver and the transmitters.
- Press the pairing button of transmitter and receiver for 3 seconds at the same time.
- When connected, the pairing indicators of transmitter and receiver will stay blue.
Otherwise, the light for receiver and transmitters will flash continually every 1 second, then try 1-3 steps again.
Feature:
– Omnidirectional conference microphone
– Ideal for surface-mounted applications
– Enhanced speech Intelligibility
– Low-profile and professional design
– Improved sensitivity and signal to noise ratio
– Plug and play operation
– No drivers needed
– Muting function available
– 2m (6.6′) USB cable
– Pick-up sound at 1 0m(32.8′) radius, with 360-degree coverage
Specifications:
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.
The SOYA logo is a trademark which is registered and owned by Shenzhen Jiayz
Photo Industrial., ltd.
COPY RIGHT 2010· 2020
TEL: 400 6131096
Email: sales@boya-mic.com
www.boya-mic.com /
www.jiayz.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>