camry CR 4615 Blender User Manual
- June 6, 2024
- camry
Table of Contents
camry CR 4615 Blender
SAFETY CONDITIONS. IMPORTANT INSTRUCTIONS ON SAFETY OF USE
The warranty conditions are different, if the device is used for commercial purpose.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The appliacable voltage is 220-240V ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are c arried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
- Never put the power cable, the plug or the whole device into the water . Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to b e replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let cord hang over edge of counter.
- Do not immerse the motor unit in water.
- The attachments not recommended or not sold by the manufacturer should not be used because that may cause fire, electrical shock or injury.
- Do not use the appliance for other than its intended use. The blades are very sharp!Care is needed when handling them
- Never blend hot oil or fat.
- Keep fingers away from moving parts.
- Do not cover vents.
- Do not use with wet hands.
- Never blend bones, ice, coffe or peanuts.
- When changing accessories, be sure that device is NOT connected to electricity.
- Short-time operating: Use the appliance for no longer than 50 seconds and leave it cooled down completely before using again about 4 minutes.
- Before first use, clean the device.
- When cleaning device, do not use aggresive detergent, it may damage the cover of the device.
PRODUCT DESCRIPTION: 1)
- Rotation speed control
- Switch ON
- “TURBO” button
- Body (motor)
- Release buttons
- Smoothie set
- Blender (removable)
- Cup
- Cup lid
INSTRUCTIONS
The hand blender is suitable for the preparation of soups, sauces, baby meals as well as drinks and cocktails.
- Insert the shredder attachment (7) onto the motor part (4) of the blender and press down to lock in place.
- Insert the attachment deep into a container filled with mixing products and switch on the mixer with the button (2) or (3).
- To remove the shredder (7) from the motor section of the mixer (4), press the release buttons (5).
Makes a coctail in a cup
- Ensure that all blender elements are clean.
- place the ingredients in the cup (8). Do not exceed 500 ml.
- Attach the blender cutting blades (8) to the blade cup (6) by screwing them onto the cup.
- Place the cup (8) with the attached cutting blades (6) on the engine unit (4).
- Connect the power cord to a power socket.
- Press the button (2) or (3) to turn on device
- Remove the power cord from the power socket.
- Remove the cup (8) from the engine unit (4).
CLEANING AND MAINTENANCE
Never put motor part into water and keep away from wet. Before cleaning always switch off and unplug from the socket.
- Always unplug the appliance from the power supply before cleaning.
- Do not immerse the motor unit in water or any other liquid.
- Wipe the outside of the motor unit with only a slightly moistened cloth and polish with a soft dry cloth.
- Wash the detachable accessories in soap water, such as blender sticks, gear boxes, whisk, bowl, jug, blade, ice crusher, vessel. Do not use scouring pads for the plastic materials. Rinse them with clear water and dry them. Do not place them in the dishwasher.
- Do not clean with any abrasive scouring pad or steel wool, as this will damage the finish of the appliance.
TECHNICAL DATA Power: 400W
- Power max: 700W
- Voltage: 220-240V~50/60Hz
- Max working time: 50 s
- Time to rest of device: 4 min
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.
Read User Manual Online (PDF format)
Loading......