anslut 002-618 Lysslynge 16 Meter Long LED Light Chain Instruction Manual
- June 6, 2024
- anslut
Table of Contents
anslut 002-618 Lysslynge 16 Meter Long LED Light Chain
LIGHT CHAIN
Operating instructions
(Translation of the original instructions)
Important I Read the user instructions carefully before use. Save them for
future reference.
Care for the environment!
Recycle discarded products in accordance with local regulations. Jula
reserves the right to make changes. For latest version of operating
instructions, see www.jula.com
SAFETY INSTRUCTIONS
- Do not connect the product to the mains power supply while the product is still in the pack.
- Designed for indoor and outdoor use.
- Check that no light sources are damaged.
- No part of the product can be replaced or repaired. The whole product must be discarded if any part is damaged.
- Do not expose the cord or conductors to mechanical loads. Do not hang objects on the string of lights.
- This is not a toy. Exercise care if the product is used near children.
- Unplug the transformer from the mains power supply when the product is not in use.
- The string of lights must not be connected to strings of lights, transformers or connectors from other manufacturers.
- The string of lights may only be connected using the enclosed connectors. There must be no open connectors during use.
- This string of lights must only be used together with strings of lights from the same manufacturer and must never be connected directly to the mains supply without a transformer. The product is not intended to be as general lighting.
- Recycle products that have reached the end of their useful life according to local regulations.
WARNING!
The string of lights may only be used if all seals are fitted correctly.
Symbols
TECHNICAL DATA
- Input voltage: 31 VDC
- Output: 2.4W
- No. of LEDs: 160 pcs.
- Protection rating: IP44
- Max. total system length: 50 m
- Max. no. of LEDs/transformer : 1000 pcs.
INSTALLATION’
- Remove the string of lights from the packaging.
- Connect the string of lights to the string of lights connected to the transformer.
- Make sure that there are no open connectors.
- Plug the plug into the mains power supply.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>