HEYMIX SS02-42 Monitor Desk Mount Instruction Manual
- June 2, 2024
- HEYMIX
Table of Contents
HEYMIX SS02-42 Monitor Desk Mount
Specifications
| Compatibility | 75×75, 100×100 VESA |
|---|---|
| Monitor Size | Up to 27 inches |
| Weight Capacity | 8 kg / 17.6 lbs per arm |
Components
- A (x2) – Arm segments
- B (x1) – Monitor attachment plate
- C (x1) – Desk clamp
- D (x1) – Pole for desk clamp
- E (x1) – Arm attachment bracket
- F (x4) – VESA monitor screws
- G (x2) – Arm adjustment knobs
- H (x2) – Desk clamp pads
- I (x2) – Pole attachment screws
- J (x1) – 5mm Hex key
- K (x1) – 6mm Hex key
Hardware Kit
- M-A (x4) – M4x12 screws
- M-B (x4) – M4x16 screws
- M-C (x4) – M6x12 screws
- M-D (x4) – M6x16 screws
- M-E (x4) – D6 washers
- M-F (x4) – Spacers
Illustrations show the components and steps for assembling the monitor desk mount. Each step is depicted with clear visuals of the hardware and tools required.
Step 1 – Attaching the Pole to the Desk
- Secure the pole (D) to the desk using desk clamp (C) with the pole attachment screws (I).
- Adjust the position of the desk clamp (C1 and C2) according to desk thickness ranging from 10-50mm.
Step 2 – Attaching the Arms
- Attach arm segments (A) to the arm attachment bracket (E) using arm adjustment knobs (G).
- Repeat for the second arm segment.
Step 3 – Preparing the Monitor
- Attach the monitor attachment plate (B) to the back of the monitor using the appropriate VESA screws (M-A or M-B for M4 and M-C or M-D for M6) and washers (M-E).
- Use spacers (M-F) if required to monitor curvature.
Step 4 – Mounting the Monitor
- Slide the monitor with the attached plate (B) onto the arms (A).
- Secure the monitor using hex keys (J and K) as needed.
FAQ
- Q: What size monitors can this mount support?
- A: It can support monitors up to 27 inches in size.
- Q: What is the weight limit for each arm?
- A: Each arm can hold up to 8 kg or 17.6 lbs.
- Q: Can this mount be installed on any desk?
- A: The mount can be installed on desks with a thickness ranging from 10-50mm.
- Q: Are tools required for assembly included?
- A: Yes, a 5mm hex key (J) and a 6mm hex key (K) are included.
- Q: What VESA sizes are compatible with this mount?
- A: It is compatible with VESA 75×75 and 100×100.
Introductions
Read the entire instruction manual before you start installation and assembly.
If you have any questions regarding any of the instructions or warnings,
please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may
result in instability causing possible injury.
- Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the
component checklist prior to installation. If any parts are missing or faulty,
telephone your local distributor for a replacement.
MAINTENANCE: Check that the bracket is secure and safe to use at regular
intervals (at least every three months).
Overview
Features
Parts And Tools
Installation Instructions
