Milesight MS-N7016 NVR Hard Disk Installation Guide
- June 5, 2024
- Milesight
Table of Contents
Milesight MS-N7016 NVR Hard Disk
NVR Models
| MS-N7016/MS-N8016| Update|
2015.07.17
---|---|---|---
MS-N7000 series Hard Disk Installation
Step1: Unscrew the back and both sides’ screws to open the upper lid.
Step2: I nstall the hard disks into NVR with screws showed in below
pictures.(SATA Slots of hard disk should be toward inside NVR.)
Step3: Join the power and data connectors to corresponding hard disk.
Note:
The data connector sequence of MS-N7000 series is different from MS-N8000
series’.
MS-N8000 series Hard Disk Installation
Step1: Unscrew the back and both sides’ screws to open the upper lid.
Step 2: Uninstall the upper hard disk panel.
Step3: Install the hard disks into NVR with screws showed in
belowpictures.
(SATA slots of hard disks should be toward inside NVR)
Note:
Make sure that the sata slots are in SHORT HALF side and the sataslot toward
inside NVR.
Step4: Join the power connectors to corresponding hard disks.(Install
lower hard disk panel before upper one)
Step5: Join the data connectors to corresponding hard disk.(Check
theconnection by below sequence)
Note:
The data connector sequence of MS-N7000 series is different fromMS
N8000series’.
-END-
Documents / Resources
|
Milesight MS-N7016 NVR Hard
Disk
[pdf] Installation Guide
MS-N7016, MS-N8016, NVR Hard Disk, Hard Disk, MS-N7016
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>