FRONTIER FWB100 Electric Walking Band User Manual

FWB100
USER MANUAL

Read this Manual carefully before use

Control Panel

1. Program: When the belt is stationary, this button may be used to choose one of the pre-set programs (manually, P1-P12)
2. Mode: When the belt is stationary, choose the mode (time, distance, number of calories)
3. Start: Starts the machine.
4. Stop: Slows the belt to a standstill.
5. Speed: Increase/decrease the speed of the belt during use.
6. Pre-set speed: While the belt is moving, these buttons (3, 5, 7, or 10km/h) may be used for direct adjustment of the speed.
7. Safety catch: If the safety control is pulled out, the display will show “-“ and the machine will emit a warning sound. The belt will stop and will only start again once the safety control has been secured in place once more.

Use

1. Start the belt: Press the start button. The belt will start moving at the lowest speed (1km/h).

2.  Adjust the speed
   a. Adjust the speed using the buttons in the control panel.
   b. Adjust using the 3, 5, 7, or 10 km/h pre-set buttons.

3. Adjust the program time in manual mode
   1. Press the MODE button once.
   2. Select the desired program time using the adjustment buttons.
   3. Press the START button
   4. The display will count down from the chosen time and stop when the countdown reaches 0.

4. Adjust the distance in manual mode
   1. Press the MODE button twice.
   2. Select the desired distance (in km) using the adjustment buttons.
   3. Press the START button
   4. The display will count down from the chosen time and stop when the countdown reaches 0.

Operating instructions

This treadmill has a very practical design. It is easy to place, easy to transport, and easily collapsible so as not to take up much storage space.
When you use the treadmill, you are training your leg muscles and strengthening your heart and lungs. Blood circulation and oxygen uptake are improved, as well as the body’s ability to absorb nutrients. Metabolism is increased, fat-burning becomes more efficient and you raise your chances of a long and healthy life.

Maintenance

• Make sure that you have turned off the power and unplugged the machine before the daily maintenance.

• Do not use products that contain formaldehyde or organic solvents to clean the treadmill as these can damage the fittings.

• Grease and dirt may be removed with a cotton cloth and light detergent. Wipe off with a dry cloth afterward.

• Use a soft, dry cloth to wipe the power button and display. Wet or damp cloths may not be used in these areas.

• Wipe only exterior parts.

• Do not use the treadmill in damp or dusty spaces.

• The belt must be placed on a flat surface.

• If the original lead becomes damaged, it must be replaced by an authorized staff member from the manufacturing or retail company.

• Only for indoor use.

• Do not use while wearing overly long or loose clothing which could catch and cause accidents.
  Use indoor training shoes.

• Do not stand on the treadmill when you start it. Stand to the side and make sure that the speed is low when you step onto the belt.

• Keep an eye on children and animals to avoid injuries. If very young, elderly, or disabled people use the treadmill this must be under the supervision of a responsible adult.

Daily Maintenance
Clean the machine regularly and remove dust. Clean both sides of the belt. Clean the belt with a cloth and a little washing-up liquid. Do not use other cleaning liquids. Wipe off sweat from the handles and belt after every use.

Lubrication
The plate and belt are factory-treated with an antistatic lubricant. Lubricate every 100 hours of use (normal use).

When the treadmill is not in use, be sure to unplug it so that children do not happen to press the start button. Keep the treadmill in a clean, dry place when it is not being used for longer periods.

Cord and plug
Do not touch the plug or cord with wet hands. Hold the plug, not the cord when you pull it out of the wall socket. Do not place heavy items on the cord. Do not wrap the cord around the machine.
Do not use the treadmill if the plug, connection, or cord is loose.

Technical Specifications

Product name: Frontier Electric Treadmill
Model: FWB100
Voltage: ~220-240 V
Frequency: 50/60 Hz
Power: 500W
Maximum weight: 120kg

Product parts

The following parts are included on delivery.

1. Handle with control panel
2.  Wrench
3. Safety control
4. Bolts x 2
5. Plastic covers
6. Belt

Assembly

1. Remove the treadmill from its packaging
2. Fix the bolt in the hole.
3. Fasten the bolt into the frame.
4. Attach the handle onto the frame with the help of the 4 pre-fitted screws.
5. Attach the signal cable.
6. Install the plastic covers.

Adjusting the belt

In some cases, the belt may need to be adjusted, for example, if it has started running crookedly.
If this is the case, place the treadmill on a flat surface and start the belt. Adjust the speed to approximately 4km/h and check the position of the belt.

If the belt is pulling to the right:

Carefully turn the right-hand bolt ¼ of a turn clockwise.Check the position of the belt after it has centered itself. Repeat until the belt is centered.c

If the belt pulls to the left:

Carefully turn the left-hand bolt ¼ of a turn clockwise. Check the position of the belt after it has centered itself. Repeat until the belt is centered

If the belt is too loose:

Shut off the belt and turn both right-hand and left-hand bolts ¼ of a turn clockwise. Repeat until the belt has an appropriate degree of tension.

Important safety information

In order to prolong the life of this product, it is important to carry out continual maintenance.
WARNING – To avoid electric shocks, always unplug the machine before cleaning or service.

• Always use the treadmill on a flat surface.

• Never place the treadmill on a thick carpet to avoid damage to both carpet and product.

• Be sure to have at least 1 meter’s distance to the nearest fixed object.

• Never let small children use or be near the treadmill.

• When you use the treadmill, make sure that the safety catch is properly fastened to your clothing. This is to ensure your safety in case you should fall or end up too far back
  on the belt.

• Keep your hands away from all moving parts.

• Do not use the product if the electrical cord is damaged.

• Keep the cord away from all warm surfaces (for example radiators)

• Never push objects into any of the product’s openings.

• This treadmill is intended for home use and is therefore not adapted to professional use.

• Never disconnect the electrical cord when the belt is in motion.

• Use appropriate footwear when you use the treadmill. High-heeled shoes, sandals, or bare feet should be avoided.

• The recommended temperature for use is 5-40 degrees Celsius.

Warranty
Frontier guarantees that this product is free from manufacturing defects in terms of materials and workmanship during a period of 2 years in Sweden, Norway, Denmark, and Finland. This warranty period begins on the day the product is purchased or delivered. Frontier has no obligation to repair or replace products that are not accompanied by a valid proof of purchase. This warranty applies only to products purchased and used for home use and does not cover damage resulting from abuse, failure to comply with the instructions from Frontier, cases in which the product has been modified or subjected to unauthorized repair, improper packaging on the part of the owner, normal wear and tear, or improper handling on the part of a transport company.

Correct Disposal of this product
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Frontier®
Makadamgatan 14 I 254 64 Helsingborg I Sweden
info@order.se

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>