FRONTIER Wi-Fi Extender Instructions

: June 13, 2024
: FRONTIER

Table of Contents

FRONTIER Wi-Fi Extender
Product Information
Product Usage Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FRONTIER Wi-Fi Extender

Product Information

The Wi-Fi Extender is a device that helps extend the range and improve the signal strength of your existing Wi-Fi network. It is designed to be placed in an area of your home where you currently have a poor Wi-Fi signal. The Extender needs to be positioned
upright on a solid surface for optimal performance.

The setup process is quick and easy, taking up to 10 minutes to complete. The Extender has two LED indicators: the Wi-Fi LED and the Internet LED. These LEDs provide visual feedback on the status of the Extender’s connection with your Router.

Product Usage Instructions

Place the Extender in an area where you have a weak Wi-Fi signal.
Ensure the Extender is standing straight up on a solid surface.
Plug in the power to the Extender and wait for the Wi-Fi LED to turn green and the Internet LED to turn red.
Press the WPS button on your Router.
Within 15 seconds, press the WPS button on the Extender.
The Wi-Fi LED on both the Router and Extender will flash yellow briefly.
The Extender’s Wi-Fi LED will then flash between green and red, indicating it is in pairing mode with the Router. This process may take several minutes.
Once the Extender’s Internet and Wi-Fi LED lights are solid green, it means the Extender is successfully connected to the Router.
If the Extender’s Internet and Wi-Fi LED lights do not become solid green, try moving the Extender to a different location closer to the Router and start over from Step 1.

If you have any questions or need further assistance, please feel free to reach out to our customer support team.

Place the Extender in the area of your home where you currently have a poor Wi-Fi signal. The Extender needs to stand straight up on a solid surface. Total setup time will be up to 10 minutes.

Plug-in the power to the Extender. Wait for the Extender’s Wi-Fi LED to be green and the Internet LED to be red.
Press the WPS button on the Router.
Within 15 seconds, press the WPS button on the Extender.
The Wi-Fi LED light will flash yellow briefly on both the Router and Extender.
The Extender’s Wi-Fi LED will flash between green and red while the device is in pairing mode with the Router. This could take several minutes.
When the Extender’s Internet and Wi-Fi LED lights are both solid green, the Extender is successfully connected to the Router.
If the Extender’s Internet and Wi-Fi LED lights do not become solid green, move your Extender to a different location, closer to the Router. Start over at Step 1.