LUXPRO LP178 Rechargeable Reading Lamp User Manual
- June 5, 2024
- LUXPRO
Table of Contents
LUXPRO LP178 Rechargeable Reading Lamp User Manual
Features
Warm color temperature for reduced eye strain
- Modes: Low/Med/High
- Built-in rechargeable battery
- 3000K Warm SMD LED Technology
- Strong gator style clip to attach to books
- Battery: 1000mAh Li-ion
Operation Instructions
On/Off : Press power button.
Cycle Modes : Press power button (Low/Medium/High).
Flexible head : Bend the head around to the desired position to illuminate the task area.
Spring clip : Use to attach around a book or other surface where light can affix to provide needed light.
Charging Product : Locate Micro USB port on top of the body of the product. Plug supplied USB cable into the charge port. Plug opposite end of USB plug into USB power source. Solid red LED indicates charging, solid green LED indicates fully charged.
Note: Lithium-ion battery is non-removable/replaceable.
Usage and Maintenance
Battery Information : Battery is sealed and replacement is not neccessary with this product. Charge time: 2hr. Li-poly; 3.7V 1000mAh
ANSI/PLATO FL1 STANDARD
MODES| **LUMENS
| RUN TIME
| BEAM DISTANCE
**
---|---|---|---
High| 16lm| 10h| 1m
Medium| 8lm| 28h| 1m
Low| 4lm| 75h| 1m
Product Warranty
Limited 90-Day Warranty against manufacturer’s defects from time of purchase. For warranty claims contact LuxPro by calling 801-553-8886 or sending an email to info@simpleproducts.com.
Ph: 866.553.8886
14725 S Porter Rockwell Blvd Ste C Bluffdale, UT 84065
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>