CL LIGHTING WYWZC433TC30W Smart Permanent Outdoor Light User Manual
- June 16, 2024
- CL LIGHTING
Table of Contents
CL LIGHTING WYWZC433TC30W Smart Permanent Outdoor Light
Features
Diagram
The picture is for reference Univ. it will be subject to the actual product).
Product parameters
Product function instructions
- Function button: single press – turn on light – mode switch Double press – turn off the light Long press for over 5 seconds to reset
- Power output
Wiring program
- Check every part including the power supply and lights and make sure every part is all in good condition.
- Fix the position of each light according to the user’s application scenario, check whether the tail plug is tightened, and then connect the adapter plug and tighten the screw Cap, installation is complete.
- Double-check if the wiring and installation are correct, then power on to enjoy the lighting after everything is correct.
Installation
Fixed by adhesive tape
suitable for temporary fix, or fix on smooth walls like glass, metal smooth
wood panels etc.
- Find the right position for installation. (The recommended distance from the corner is 5-10cm).
- Clean the surface of the wall.
- Stick the adhesive tape on the back of the light, tea off the release paper from the adhesive tape.
- Fix the light on the wall and press for over 5 seconds.
- Connect the waterproof connector.
Fixed by screws
suitable for long permanent fixing, or used for rough or irregular walls.
- Find the right position for installation. (The recommended distance from the corner is 5-10cm).
- Drill the crew holes according to the installation position on the wall.
- Fix the lights with the screws through the holes.
- Connect the waterproof connectors.
Notes
- Please make sure to fully clean the surface of the walls before using the adhesive tape, and fully press the lights after sticking the lights with adhesive tape.
- Don’t use adhesive tape to fix the lights on lime walls, wallpapers and other irregular walls.
- If you need to extend the lights with two or more strings, just connect the end of the first string with the head of the second string through the waterproof connector. And make sure to choose a higher power supply for the lights. (Such as the 30 bulbs require a 24W power supply, and 60 bulbs will require a 36W of power supply).
Download APP
Search “Smart Life” from the App store or Google play.
- Download APP Search “Smart Life” from the App store or Google play.
- Scan the QR code from the label or user manual.
- The APP is compatible with Android 5.0 and IOS 10.0 and higher versions.
Log in / Register account number
Ahan the Ahh fan in fara meant arta truth an outta assault
APP connection
- Preparation: Power on the LED lights and enter the home of the APP. Make sure the WiFi signal is good and stable.
- The LED lights will start quick flash when it is powered on. Then click the “Add devices” to manually add the devices, follow the steps until the devices and APP are pairing successfully.
- If the LED light not quick flash after being powered on the light, please long press the switch button of the controller for more than 5 seconds to reset.
- When the LED lights start quick flash, Then click the “Add devices” to manually add the devices follow the steps until the devices and APP are noirina clinnoce
- Ul Introduction
- Interfaces for basic adjustment: you can set the quantity of bulbs, light colors, color palette. combination color temperature and brightness on this Ul.
- Smear toning: Fill the whole section with a paint bucket through the interactive method of painting, and then you can change the color of the painting through the color pen, and use the eraser to extinguish it independently.
DIY Scene Mode
Customize the scene with a combination of motion and colour.
Musical Rhythm
The lights will jump with the rhythm and volume of the internal music of your
mobile phone.
Countdown to turning off the lights
Voice control
Take Alexa as an example
Bind the APP and operate
- Download the Alexa APP and register and log in an Amazon account
- Open the APP of Smart Life, clicking the “Me” from home page, then find the “Third-party Voice Services”, and finally find the Alexa.
- Click on “Sign in with Amazon” and it will come out with a tips, then click on the “LINK”, you will bind the APP of Alexa to Smart Life.
Frequently-used commands
- Alexa, turn on/off the bedroom light.
- Alexa, set the bedroom light to 50 per cent.
- Alexa, brighten/dim bedroom light.
- Alexa, set the bedroom light to green.
Matters needing attention
- The output lead wire of power supply and the DC input lead wire of the controller do not expose in rainy weather.
- The remote control should be code pairing before use. If the remote control is not sensitive, please try to replace the battery
- This product supports the use under the environmental temperature of -25-60C, if beyond this temperate ancestor sitesive tape and screws,cable clips, please kindly notify our sales when placing the order.
- The defaulted length for this product is 15m (50ft) each string.
- If you need compatible using 1 string and 2 string under same controller, please notify your sales to set the correct PID for the products and use a larger power supply of 36W.
Instructions of remote
Brief introduction
Through the 12-key RF433 remote, you can remote control and get various
lighting effects such as dimming, color switching, water flow, rainbow,
flowing light and color etc
Parameters
Power supply way
Remote control distance [Important] Request Code Matching Before Using the
Remote Controller.
- Power on the light and pair the remote controller with the light within 30 seconds
- And press the button of “Multi”+”Random” for over 5 seconds at the same time
- when the lights flash it means the nearing successfully.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: This device may not cause harmful interference.
This device must accept any interference received, including interference that
may cause undesired operation. Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body