RETEKESS TR613 FM MW SW 3-Band Radio Support TF Card User Manual

June 6, 2024
RETEKESS

RETEKESS - logo

User Manual
TR613 FM MW SW 3-Band Radio Support TF Card

Thank you for purchasing the Retekess TR613 3-band radio. Please read the manual thoroughly before operating it and keep it in a safe place for future reference.

Precautions

  1. Please remove the battery when the radio is not to be used for a long time, store it separately, and remember to charge it once a month
  2. Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool.
  3. Do not use the radio near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  4. Do not put the product on a bed, sofa, rug, or other similar surfaces to prevent the vents from being blocked.
  5. Do not spill or spray any type of liquid on the product. Do not allow any solid or liquid to enter the radio from the vents.
  6. Do not disassemble, repair, remodel, or drop the radio arbitrarily.
  7. Do not expose the battery to excessive heat environments (such as direct sunlight, open flames, or similar environments)

Location of parts and controls

1. Telescopic antenna
2. Battery compartment
3. Hand strap hole
4. Headphone jack
5. TF card slot
6. DC 5V power port
7. Frequency indicator
8. LCD display
9. Play/Pause/Loop (long press)| 10. Previous song (long press and hold -10 song)
11. Band
12. Next song (long press and hold +10 song)
13. Menu (function selector, long press to set the time)
14. SW indicator
15. MW indicator
16. FM indicator
17. Tuning Knob
18. Volume/Power on/off
---|---

Precautions

  1. Play/Pause indicator
  2. TF card indicator
  3. flashes when on the single loop mode always on when on the all loop mode
  4. Battery indicator
  5. Time display when playing track
    Tracking number display before playing track (last 2s)

Power Supply
Operating on battery: Slide and open the battery compartment lid (2). Insert the battery with correct polarity in the battery compartment. Close the battery compartment lid.
Charging: You need to charge the battery when the battery icon flashes. Using the USB cable included in the package, connect the AC power adaptor securely to the DC 5V jack to start charging, the battery icon flash while charging, and the flashes will be stopped and stay at after the battery is fully charged.
When you need to read the data from the TF card on the computer, please turn on the radio, insert the
TF card to the TF card slot and connect the radio to the PC with a dateline.

NOTE:

  1. Improper replacement of the battery will cause explosion hazards. Only the same type or equivalent type can be used.
  2. Do not bend or twist the power cord forcibly. Do not place heavy objects on the power cord.
  3. Always hold the plug when disconnecting the power cord. Do not pull the cord itself.
  4. Disconnect the AC power adaptor from the wall outlet and radio when the unit is not to be used for a long period of time.

Operations

  1. Slide the Power on/off button (18) to ON position to turn on the radio
  2. Press the M button (13) repeatedly to select the Radio function
  3. Slide the Band button (11) to FM, MW, or SW band position as desire
  4. Tuning the Tune knob (17) to select the desired station.
  5. Slide the Volume Control Knob (18) to adjust the volume level as desired.
    To improve reception
    FM reception: Extend the telescopic antenna (1), and adjust the direction and angle.
    MW reception: Retract the telescopic antenna and rotate the unit to reorient the built-in ferrite bar antenna
    SW reception: Fully extend the telescopic antenna vertically.
    For SW reception, you can enjoy even better reception by using an external antenna

TF Card Operation

  1. Slide the Power on/off button (18) to ON position to turn on the radio
  2. Press the M button (13) repeatedly to select the TF Card function
  3. Insert the TF card with MP3 or WMA format audios into the TF card slot (5), the audio will be played automatically in a few seconds. And the tracks will appear on the LCD display.
  4. Press (10) or (12) buttons to select the desired track. Long press and hold or buttons could fast select desired track by -10 or +10 tracks.
  5. Long press (9) button to set single loop, all loop, or cancel the loop mode.
  6. In the playback state, press (9) button to pause, press again to resume normal playback.
  7. Slide the Volume Control Knob (18)to adjust the volume level as desired

Time Setting

  1. In the shutdown state, long-press the “M” (13) button to enter time setting mode, the hour character flashes on LCD display at the same time.
  2. Press (10) or (12) buttons to adjust the hour, press “M” (13) button to confirm, and then set the minute.
  3. Press (10) or (12) buttons to adjust minute, and press “M” (13) button to confirm. The system will automatically confirm the current adjustment time if there is no operation within 5 seconds.

Headphone

You can enjoy FM stereo broadcasting by connecting the optional stereo headphones to the Headphone jack (4) on the unit. When using headphones, the sound from the speaker will be muted.

Specifications

Power input: 5V–0.6A
Rated power: 3W
Lithium battery: 3.7V
Frequencies: FM: 88-108MH
MW: 530-1600KHz
SW: 8.0-18.0MHz
Antenna: FM/SW: telescopic antenna
MW: built-in ferrite bar antenna
Speaker: 6Ω
The maximum power without distortion: 1W
Size: 173 x 91.6 x 37.4mm
Weight: 277.6g (without battery)
Include accessories: user manual, warranty card, 18650 lithium battery, USB cable, hand strap.

RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE

Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.

Local Government Regulations
When radios are used as a consequence of employment, the Local Government Regulations requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retekess radio has a RF Exposure Product Label. Also, your Retekess user manual or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.

Unauthorized modification and adjustment

Changes or modifications not expressly approved by the party responsible for compliance may void the user’s authority granted by the local government radio management departments to operate this radio and should not be made. To comply with the corresponding requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services.
Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules.

FCC Requirements:

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
•  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

CE Requirements:

• (Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address: www.retekess.com.

• Disposal

The crossed-out wheeled bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.

IC Requirements:
Licence-exempt radio apparatus
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

RF Warning Statements
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

RF Exposure Information

  • DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is an antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer declared.
  • To avoid interference, turn off the radio in areas where signs are posted to do so.
  • DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.

Avoid Choking Hazard
Small Parts. Not for children under 3 years.

Protect your hearing:


WARNING

  • Use the lowest volume necessary to do your job.
  • Turn up the volume only if you are in noisy surroundings.
  • Turn down the volume before adding a headset or earpiece.
  • Limit the amount of time you use headsets or earpieces at high volume.
  • When using the radio without a headset or earpiece, do not place the radio’s speaker directly against your ear
  • Use care with the earphone may be possible excessive sound pressure from earphones and headphones can cause hearing  loss
    Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio’s volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.

Approved Accessories


WARNING

  • This radio meets the RF exposure guidelines when used with the Retekess accessories supplied or designated for the product. The use of other accessories may not ensure compliance with the RF exposure guidelines and may violate regulations.
  • For a list of Retekess-approved accessories for your radio model, visit the following website: http://www.Retekess.com

RETEKESS TR613 FM MW SW 3-Band Radio Support TF Card -
iconRETEKESS TR613 FM MW SW 3-Band
Radio Support TF Card - icon 1https://retekess.com.ru/

Henan Eshow Electronic Commerce Co., Ltd
Add: 7/F, Sanjiang Building, No.170 Nanyang Road,
Huiji District, Zhengzhou, Henan, China
Facebook: facebook.com/Retekess.ru
E-mail: support@retekess.com.ru
Web: retekess.com.ru

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals