anslut 017145 LED Strip Instruction Manual
- June 6, 2024
- anslut
Table of Contents
anslut 017145 LED Strip
SAFETY INSTRUCTIONS
- Read the operating instructions carefully before use.
- Check that all connections are properly made before switching on the product.
- If the product does not work, check that the circuit is supplied with voltage.
- Keep children at a safe distance from the product when it is in use.
- If the permitted maximum voltage is exceeded this can damage the product, or reduce its life span.
- Do not look directly into the light source.
- Store out of the reach of children.
- Do not cover the product when in use.
- Always unplug the power cord and allow the product to cool before cleaning,
- or maintenance to reduce the risk of electric shock.
- The light source is not replaceable. Discard the product if the light source stops working.
- Do not open or dismantle the product. The product does not have any parts that can be repaired by the user.
SYMBOLS
TECHNICAL DATA
- Rated voltage; 230 V~ 50 Hz
- Output: 18W
- Luminous flux: 1300Im
- Colour temperature; 3000 K
- No. of LEDs: 960
- Protection rating: IP20
- Size: 3000 x 8 x 2.3 mm
- Cord length: 1530 mm
- Operating temperature: -20 -40°C
- Storage temperature: -20 -45°C
USE
- Remove the protective paper and attach the LED strip at the required place.
NOTE: Do not bend the strip too much. - Connect the cord to the plug.
- Plug the plug into a power point.
The LED strip can be cut at the markings. 
MAINTENANCE
Wipe the product with a dry, soft cloth when necessary.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>