TAKSTAR TS-451M USB Headset User Manual
- June 6, 2024
- TAKSTAR
Table of Contents
TAKSTAR TS-451M USB Headset User Manual
Preface
Dear Customer,
Thank you for purchasing TAKSTAR TS-451M USB Headset. Please read the user
manual carefully before use and keep it for reference in future.
If you have any questions or suggestions, please contact our local dealer.
Features
- Built-in high-quality digital decoding chip for precise reproduction of sound details and digital HD sound quality
- PET diaphragm of good stability to reproduce the details, sound field and level of music
- Closed design and comfortable ear pads to provide better sound insulation
- High-sensitivity microphone for excellent voice quality
- Ergonomic headset design suitable for different groups of people
- Compatible with a wider range of equipment thanks to Type-C interface and USB-Aadapter
Product Content
- Headset: 1 pc
- USB Type-C adapter: 1 pc
- User manual: 1 pc
Application
Suitable for PC, MAC and mobile devices with Type-C interface
Specification
- Product Type: dynamic
- Unit Diameter: Ø40mm
- Frequency Response: 20Hz-20KHz
- Sampling Rate: 48KHz
- Bit Rate: 24bit
- Maximum Output Power: 6.5mW
- Impedance: 32Ω±15%
- Sensitivity: 97±3dB at 1KHz
- Microphone Polar Pattern: unidirectional
- Microphone Frequency Response: 80Hz-15KHz
- Microphone Sensitivity: -41±3dBV（1V/Pa at 1KHz）
- Connector: Type-Cinterface
- Adapter: USB-A to Type-C
- Signal Cable: Ø4mm＊2m
- Weight: approximately 230g (excluding adapter)
- Note: The data is tested by Takstar Laboratory, and Takstar has the final
interpretation right!
Operation Description
Use of the microphone
-
Rotate it upward for the mute function.
-
Rotate it downward to cancel the mute function.
Device connection
Device default settings
Windows：
After clicking “Control Panel”/”Hardware and Sound”/”Sound” one by one, select “TS-451M” from the “Play” and “Record” tabs.
Mac：
After clicking “System Preferences”/”Sound” one by one, select “TS-451M” from the “Output” and “Input” tabs.
Correct Operation
For safe and comfortable operation, please read carefully and abide by the following items:
-
To avoid hearing loss, set the volume of the player to minimum before connecting the headset. After putting the earphone on, increase the volume to a proper level.
Noise is measured in decibels (dB). Any outside noise of 85 decibels or more will cause gradual hearing loss. -
Please pay attention to your operation habits! Volume and time are directly and inversely proportional to hearing loss. The louder the volume, the shorter the time you listen; the more comfortable the volume is, the longer the time you listen. Listen high volume sound will cause damage to your hearing.
This dB table lists the comparison of some normal sounds and the potential hurt level to your hearing：
| Sound Source | Noise Level | Consequence on Hearing |
|---|---|---|
| whisper | 30dB | very quiet |
| quiet office | 50-60dB | comfortable hearing level is below 60dB |
| vacuum cleaner/ hair drier | 70dB | It has some invasion and interference to the |
telephone talking
food processor| 85-90dB| 85dB (continuously 8 hours) is the level to hurt the
hearing
garbage cleaning machine or cement mixer| 100dB| It is recommended to hear the
sound of 90-100dB for less than 15 minutes
electric motor saw/ electric drill| 110dB| Hearing the sound over 100dB
without any protective measure leads to permanent hearing loss
rock & roll concert (it depends)| 110-140dB| The painful hearing threshold is
about 120dB
The average person can hear the music safely at 70% volume for 4.6 hours every day. It is very important to know the volume and time when hearing music. Use your equipment sufficiently at safe volume level to enjoy the outstanding sound performance.
Maintenance
- The maximum output power of the headset is 6.5mW. Please do not overload it to avoid damage to the headset.
- Please keep the headphone (or earphone) in dry and clean environment. During operation, prevent the headphone (or earphone) from water entering into it or dropping or colliding to avoid damage.
- Operating the headphone in high temperature or high humidity leads to headphone damage or shortening the headphone life.
- Keep the headphone away from strong magnet to avoid demagnetizing or headphone sensitivity decreased.
- Do not use strong chemical or detergent for cleaning.
- Do not use sharp article to scratch the product surface.
- Please do not disassemble or repair the headphone by yourself to avoid problem happens.
Caution
DANGER
To guarantee personal safety, do not wear or keep the headphone close (less
than 10cm) to the pacemaker.| Prohibition
---|---
Do not connect the cable plug with AC power socket| Prohibition
To guarantee personal safety, do not operate the headphone (or earphone)
during driving or riding or walking.| Implementation
Keep the headphone (or earphone) away from fire to avoid explosion.|
Prohibition
WARNING
Supervise the children when they are using this product because this product
is not a toy.| Implementation
---|---
Abide by the relative regulation or law during operation. Do not use this
headphone if it is prohibited by regulation or law to avoid accident.|
Implementation
Icon meaning
According to the test results of RL2004 / 108 / EG and European low voltage directive RL2006 / 95 / EG, this product conforms tao the limit values specified in the directive of the European Community on the integration of the laws of the member states on electromagnetic compatibility.
This symbol indicates that according to WEEE Directive (2012 / 19 / EU) and national laws, this type of waste will have potential harmful substances, which may have a negative impact on the environment and human health, so this product should not be disposed together with your household waste, and should be handed over to the authorized electrical and electronic equipment (WEEE) recycling station for recycling. At the same time, when you handle this product correctly, it will help the effective use of natural resources. For more information on where you can place your waste recycling equipment, please contact your local city office, Waste Management Bureau or household waste treatment service.
Customer Support
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang YiRd., Longxi Boluo
Huizhou, Guangdong 516121 China
Tel: 86 752 6383644
Fax: 86 752 6383952
Email: sales@takstar.com
Website: www.takstar.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>