anslut 017144 LED Strip WiFi Wireless Smart Phone APP Controlled Instruction Manual

June 6, 2024
anslut

anslut 017144 LED Strip WiFi Wireless Smart Phone APP Controlled -
logoItem no. 017144
LED STRIPanslut 017144 LED Strip WiFi Wireless Smart Phone APP Controlled -
charger

LED STRIP
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference.
(Translation of the original instructions).

Care for the environment!
Recycle discarded product in accordance with local regulations.
Jula reserves the right to make changes. For latest version of operating instructions, see www.jula.com

anslut 017144 LED Strip WiFi Wireless Smart Phone APP Controlled -
Boxanslut 017144 LED
Strip WiFi Wireless Smart Phone APP Controlled - Box2anslut 017144 LED Strip WiFi Wireless Smart
Phone APP Controlled - Box3

SAFETY INSTRUCTIONS

  • Read the operating instructions carefully before use.
  • Check that all connections are properly made before switching on the product.
  • If the product does not work, check that the circuit is supplied with voltage.
  • Keep children at a safe distance from the product when it is in use.
  • If the permitted maximum voltage is exceeded this can damage the product, or reduce its life span.
  • Do not look directly into the light source.
  • Store out of the reach of children.
  • Do not cover the product when in use.
  • Always unplug the power cord and allow the product to cool before cleaning, or maintenance to reduce the risk of electric shock.
  • The light source is not replaceable. Discard the product if the light source stops working.
  • Do not open or dismantle the product. The product does not have any parts that can be repaired by the user.

SYMBOLS

| Read the instructions.
---|---
| Approved in accordance with the relevant directives.
| Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

Rated voltage 230 V ∼ 50 Hz
Output 5 W
Luminous flux 460 Im
Colour temperature 3000 K
No. of LEDs 320
Protection rating IP20
Size 1000 × 8 × 2.3 mm
Cord length 1540 mm
Operating temperature -20 – 40°C
Storage temperature -20 – 45°C

USE

  1. Remove the protective paper and attach the LED strip at the required place.
    FIG. 1
    NOTE:
    Do not bend the strip too much.
    FIG. 2

  2. Connect the cord to the plug.

  3. Plug the plug into a power point.
    The LED strip can be cut at the markings.
    FIG. 3

MAINTENANCE

Wipe the product with a dry, soft cloth when necessary.

JULA AB, BOX 363, SE-532 24 SKARA
2022-02-01
© Jula AB

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals