anslut 423-371 Bathroom Floor Light Instruction Manual
- June 6, 2024
- anslut
Table of Contents
anslut 423-371 Bathroom Floor Light Instruction Manual
BATHROOM LIGHT
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference.
(Translation of the original instructions).
SAFETY INSTRUCTIONS
Read the user instructions carefully before use!
Save them for future reference.
- The light fitting is designed for indoor use only.
- The light fitting should be mounted on a ceiling. It must not be mounted on a wall.
- The electrical installation must comply with local regulations. Consult an authorised electrician if in doubt. Disconnect the power supply before electrical installation.
- Do not insert or remove light sources when the light fitting is connected to the mains supply.
- Do not use light sources with more than the permitted output (see type plate) – risk of overheating.
- The light fitting gets hot when in use. Switch the light sources off for at least 30 minutes before adjusting, cleaning or changing. otherwise there is a risk of burns.
- Handle glass parts with care. Clean with a dry cloth. Never use liquids or abrasive detergents.
- No object may be placed closer than 0.5 metres to the light fitting.
- Never modify the light fitting in any way. Modifications can result in serious personal injury and void the warranty.
ELECTRICAL SAFETY
New installations and extensions to existing systems should always be carried
out by an authorised electrician. If you have the necessary experience and
knowledge, you may replace switches and power points, fit plugs, extension
cords and light sockets. If not, you should contact an electrician. Incorrect
installation can result in electric shock or fire.
TECHNICAL DATA
ASSEMBLY
NOTE: Check that there are no concealed electric cables or conduits where the installation is to be carried out before installing.
Read More About This Manual & Download PDF: