anslut 423927 Garden Lantern Instruction Manual
- June 6, 2024
- anslut
Table of Contents
**anslut 423927 Garden Lantern Instruction Manual
**
SAFETY INSTRUCTIONS
Read the operating instructions carefully before use. Save them for future reference.
WARNING: Check that the power supply is disconnected prior to installation.
- The product can not be used as street lighting.
- The bulb gets hot when it is switched on. Do not touch the bulb until it has cooled.
- Disconnect the power supply and allow the bulb to cool before changing.
- Never use bulbs with a higher output power than that specified in the technical data.
- Never use the product if the protective cover or glass is damaged or cracked. Replace defective parts as soon as possible.
- Never look directly at the light source.
- The earth wire must always be connected.
- Use wires with a cross sectional area of at least 1 mm2.
- Use a 2-way switch.
ELECTRICAL SAFETY
New installations and extensions to existing installations should always be carried out by an authorised electrician. If you have the necessary experience and knowledge (otherwise contact electrician), you may replace switches and power points, fit plugs, extension cords and light sockets. Incorrect installation can result in electric shock or fire.
TECHNICAL DATA
| Rated voltage | 230 V — 50 Hz |
|---|---|
| Protection rating | IP44 |
| Socket base | 3x E27 |
| Max. output (light source) | 60 W |
| Height | 220 cm |
INSTALLATION
WARNING: Check that the power supply is disconnected prior to installation. Follow the instructions below.
Install according to steps 1-6 below.
MAINTENANCE
Treat with acid-free oil, for example WD-40, 3-4 times per year. We do not recommend the use of stainless steel luminaires in exposed and corrosive environments.
Changing the bulb
IMPORTANT:
Disconnect the power supply before changing the bulb.
- Remove the top cover.
- Allow the bulb to cool and then screw it out carefully (do not touch the bulb with your bare hands).
- Carefully screw in the new bulb.
- Fit the upper cover before reconnecting the power supply.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>