anslut 015777 LED Spotlights Instruction Manual
- June 6, 2024
- anslut
Table of Contents
anslut 015777 LED Spotlights
SAFETY INSTRUCTIONS
- Do not connect the product to the mains while still in the pack.
- For outdoor use.
- Check that no light sources are damaged.
- No parts of the product can be replaced, or repaired. The whole product must be discarded if any part is damaged.
- Do not use sharp or pointed objects during assembly.
- Do not subject the, power cord or wires to mechanical stress.
- This is not a toy. Be careful if using the product near children.
- Disconnect the transformer from the power point when the product is not in use.
- This product must never be connected directly to a power point without the transformer.
- This product must only be connected to the supplied transformer.
- The product is not intended to be used as general lighting.
- Recycle products that have reached the end of their useful life according to local regulations.
WARNING!
The string of lights may only be used if all seals are fitted correctly.
SYMBOLS
| Approved as per applicable directives.
---|---
| Class Ill.
| Recycle discarded product in accordance with local regulations.
TECHNICAL DATA
| Rated voltage | 6 V DC/ 230 V ~ 50 Hz |
|---|---|
| Output | 2×3 W |
| Protection rating | IP44 |
| Colour temperature | 3000 K |
| Luminous flux | 270 lm |
| Colour rendering index | RA> 80 |
| Cord length | 4+2m |
USE
CONNECTION
- Put the lights in the required place.
- Route the power cord so that there is no risk of it being exposed to a lawn mower or other damage.
- Connect the power cord to the transformer.
- Plug the plug into the mains.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>