anslut 423361 Spot Light Instruction Manual

June 6, 2024
anslut

anslut 423361 Spot Light

anslut 423361 Spot Light

SAFETY INSTRUCTIONS

Read the user instructions carefully before use!
Save these instructions for future reference.

  • FOR INDOOR USE ONLY.
  • For wall mounting.
  • Do not connect the product to the mains while it is still in the pack.
  • Do not insert or remove bulbs when the product is connected to the mains supply.
  • Do not use in bathrooms, or wash rooms etc.
  • Do not use bulbs with more than the permitted output (see type plate) – risk of overheating.
  • The product gets hot when in use. Leave the product switched off for at least 10 minutes before adjusting, cleaning or changing the bulb, otherwise there is a risk of burn injuries.
  • Handle glass parts with care. Clean with a dry cloth. Never use liquids or abrasive detergents.
  • No object may be placed closer than 0.5 metres to the product.
  • Never modify the product in any way. Modifications can result in serious personal injury and void the warranty.

ELECTRICAL SAFETY
New installations and extensions to existing systems should always be carried out by an authorised electrician. If you have the necessary experience and knowledge, you may replace switches and power points, fit plugs, extension cords and light sockets. If not, you should contact an electrician. Incorrect installation can result in electric shock or fire.

TECHNICAL DATA

Rated voltage                          230 V/50 Hz
Power Max.                            200W
Bulbs                                       4
Socket                                     GU70
Width x Leng ht x Height       75 x 77 x 75 cm

INSTALLATION

PREPARATIONS
  • Check that there are no concealed electric cables or conduits where the installation is to be carried out.
  • Remove all the packaging material and check that all the parts are included. Follow these instructions when installing.
  • Check that all screw connections and electrical connections are tightened before use. The product can be connected to a dimmer.
  • Contact an authorised electrician for advice on a suitable type of dimmer.
TOOLS
  • Flat and crosshead screwdrivers.
  • Drill and drills.
  • Stripping pliers for electric wires.

installation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals