anslut 006864 Wall Socket Instruction Manual
- June 6, 2024
- anslut
Table of Contents
anslut 006864 Wall Socket Instruction Manual
Care for the environment!
Recycle discarded product in accordance with local regulations.
Jula reserves the right to make changes. For latest version of operating
instructions, see www.jula.com
JULA AB, BOX 363, SE-532 24 SK.ARA
2022-01-03
© Jula AB
SAFETY INSTRUCTIONS
- Do not connect power strips to each other.
- Do not cover the power strip.
ELECTRICAL SAFETY
New installations and extensions to existing systems should always be carried out by an authorised electrician. If you have the necessary experience and knowledge (otherwise contact an electrician), you can replace power switches and wall sockets, fit plugs, extension cords and light sockets. Incorrect installation can result in fatal injury and the risk of fire.
SYMBOLS
TECHNICAL DATA
USB CHARGER
NOTE:
The USB charger connection’s total output current is 4.8 A. The current is disconnected automatically if the charging current exceeds this value to protect the connected devices.
ASSEMBLY
INSTALLATION
-
Disconnect the power supply by taking out the fuse and check that the wires are without voltage.
-
Strip about 77 mm off the ends of the wires.
-
Dismantle the product into three parts as shown in figure 7.
FIG. 1 -
Connect the wires according to the colour and N and L markings.
FIG. 2 -
Screw the front onto the box. Make sure not to pinch the wires.
-
Press the frame and panel in place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>