anslut 423390 Bathroom Light Instruction Manual

anslut 423390 Bathroom Light

SAFETY INSTRUCTIONS

Read the user instructions carefully before use!
Save them for future reference.

•  Never modify the light fitting in any way. Modifications can result in serious personal injury and void the warranty.
•  For indoor use only.
•  Do not connect the light fitting to the mains while it is still in the pack.
•  The light fitting must only be installed by an authorized electrician.
•  All electrical connections and connection cables must comply with local regulations for electrical installations. The main connection should be fused with a 70 A fuse.
•  The light fitting must be installed correctly to work reliably.
•  Different types of fasteners are required depending on the type of wall the light fitting will be fastened to. Make sure that the light fitting is properly mounted before use.
•  Do not overload electrical outlets and extension cords; this may otherwise cause a fire or electric shock.
•  Make sure that the light fitting is not connected to the mains supply before installation or during maintenance.
•  Never look directly into the light source. The light fitting must not be used if the glass shade is damaged or missing.
•  The power cord is not replaceable, if damaged discard the complete product.

The light fitting is approved for use down to zone 7; spaces above the bath or shower, up to 600 mm from the showerhead.

TECHNICAL DATA

• Voltage                                                                         230 V
• Protection rating                                                          IP44
• Max. permitted power on the light source                   2x40W
• Dimensions                                                                 B275xH80xD110 mm
• Adapted for light sources of Energy class                    A++ to D
• Socket                                                                         G9

ASSEMBLY

WARNING :
Make sure that the light fitting is not connected to the main supply during installation.

MAINTENANCE

•  Make sure that the light fitting is not connected to the mains supply during cleaning.
•  Clean the external parts with a soft, slightly damp cloth. Never use alcohol, solvents, corrosive or abrasive agents.
•  Make sure that the light fitting is dry before being reconnected to the main supply.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>