Luxorparts 45198 Power Supply 60W User Manual
- June 6, 2024
- luxorparts
Table of Contents
Luxorparts 45198 Power Supply 60W
Overview
DC plugs
Specifications
- Input voltage: 100 – 240 V AC
- Input AC frequency (Hz) : 50 – 60 Hz
- Input full load current (100 V AC): 1200 mA
- Output voltage/current (DC): 12.0 V, 4.2 A, 50.4 W / 15.0 V, 4.0 A. 60.0 W / 16.0 V, 3.2 A, 51.2 W / 18.5 V, 3.0 A, 55.5 W / 19.0 V, 3.0 A. 57.0 W / 20.0 V, 3.0 A. 600 W / 24.0 V, 2.5 A, 60.0 W
- Output power (WI : Max. 60 W
- Average active efficiency(%): Min 88.9% (for 12V); Min 85.0% (for 15V); Min 89.6% (for 16V); Min 89.8% (for 18.5V); Min 89.9% (for 19V); Min 90.3% (for 20V); Min 91.0% (for 24V)
- Efficiency at low load (10%): Min 87.88% (for 12V); Min 89.3% (for 15V); Min 88.7% (for 16V); Min 86.6% (for 18.5V); Min 88.4% (for 19V); Min 88.3% (for 20V); Min 88.0% (for 24V)
No-load power consumption (W): 0.21 W
Use
Before plugging the adapter into a wall outlet, read and follow these
instructions.
Set the voltage output with the voltage selector in accordance with the
voltage requirement of your device. Note! When the output voltage of the no-
load state is not 12 V, the output voltage drops to 12 V after 5 minutes.
Press and hold the button for more than 3 seconds to fix the voltage while
selecting it. The indicator flashes 3 times, and the voltage will lock even
when the device is powered off or on standby.
When the voltage is locked, it cannot be adjusted. To unlock the voltage,
press and hold the button for more than 3 seconds again. The indicator flashes
3 times and the voltage can be adjusted again.
Verify that the amperage (mA) requirement of your device does not exceed the
amperage (mA) of this adapter.
Determine the polarity(+ or -I of your device, it is located on the device or
in the device’s manual. See below for the polarity symbol.
Select the proper DC plug (2) and plug it into the DC plug jack
- The arrow on the DC plug jack (1) should be pointing to the correct polarity symbol (positive or negative) on the DC plug
- The DC plug (2) has a positive(+) center on one side and a negative(-) center on the other.
Plug the adapter into a 100-240 V wall outlet.
Important! If the unit does not operate properly, unplug the adapter and check the voltage and polarity settings.
Safety information
Important information regarding safety issues
This appliance is only intended for household use and may only be used
indoors. The appliance is not intended for professional use. Avoid dirty
and/or dusty environments. Place the appliance in a stable position in a dry
room with normal ventilation. See
to it that cables are drawn in a way that does not infringe any person or
property damage, e.g., due to falling or stumbling. Leave enough space around
and over the appliance so that air can circulate freely. Do not cover
ventilation openings. Never place the appliance in a closed compartment or in
a box. Coverage of the appliance can lead to overheating and thus cause a
fire. Never place the appliance close to open fire, near heat sources or in
direct sunlight. Never use the appliance in damp areas or near a sink,
washstand, bathtub, shower, etc. Never touch the appliance with wet hands.
See to it that the appliance is unplugged when assembling or disassembling
separate parts. Do not unplug the appliance by pulling the cord; always grab
the adapter when unplugging it from the wall socket.
This appliance is produced in accordance with directive 2012/19/ EU, Waste
Electrical and Electronic Equipment (WEEE). This means that the
manufacturer/importer is responsible for the collection, handling, and
recycling of a used product. The crossedover trash bin symbol shows that the
appliance must be disposed of separately from ordinary household waste.
Dispose of the electronic equipment at recycling centers for electrical waste
so as to help conserve natural resources.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>