TIMBER XXL Zero Gravity Reclining Side Table Full Padded Lounge Chair Instructions

June 14, 2024
TIMBER

TIMBER XXL Zero Gravity Reclining Side Table Full Padded Lounge Chair

TIMBER-XXL-Zero-Gravity-Reclining-Side-Table-Full-Padded-Lounge-Chair-
PRO

INSTRUCTIONS FOR USE

IMPORTANT! PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE USING THE LOUNGER!

  1. STEP 1

    • Ensure the locking levers on both sides are pointing back, in unlock position.
    • Stand behind chair and hold upright. Place one hand on top of the armrest, and the other hand on top of backrest.
  2. STEP 2 Open the chair fully from the side. If opening from the back, then push the chair open and watch your toes.

  3. STEP 3 Lay back relaxed and legs on the footpad. Give a gentle kick down to initiate the Zero Gravity experience, and you will start to recline.TIMBER-XXL-Zero-Gravity-Reclining-Side-Table-Full-Padded-Lounge-Chair-3

  4. Pull out side table from under the chair rotate, and lock securely on front leg pin.Store table in reverse sequence. See Figure 4TIMBER-XXL-Zero-Gravity-Reclining-Side-Table-Full-Padded-Lounge-Chair-4
    CAUTION

    • Do not put your fingers under the arm adjustment area at any time.
    • Always keep hands and fingers on the top surface of the arm.
    • Do not attempt to adjust positions if your fingers are under the arm.
    • Always engage the Locking Levers when sitting in the Lounger.

INSTRUCTIONS

  1. Position the Lounger in the upright sitting position.
  2. Sit in the Lounger while it is in the upright(Chair) position.
  3. Put both hands on top of the plastic arms, then lean back to any desired position after making sure that the Locking Levers are in The Open Position by pushing the Locking Lever forward.
  4. Lock in your present position by engaging the Locking Levers on both arms backwards. Always lock both arms.
  5. To change positions or sit up, unlock the Levers first, and then change positions. Re-lock the Levers when you have found the position you want.
  6. Make sure that the levers are unlocked before openning the lounger. To change position or sit up, unlock the levers first, and then change position. Re-lock the levers when you have found the position you desire

USE AND CARE

  • Clean with sponge, mild soap and water. Dry with white cloth or paper towel. Do not use a colored towel as colors may bleed onto the Lounger sling.
  • Fabric needs to air dry. Do not use abrasive cleaners or scrub pads as it may damage the finish.
  • Regularly check the tightness of all hardware to ensure best stability and safety.
  • It is recommended to use a rain cover during inclement weather, which will extend the life and keep the lounger cleaner. In climates with snow and ice during winter, it is strongly recommended that the Lounger be stored out of the weather.

AFTER-SALES GUARANTEE
This product comes with a 1-year limited warranty from the date of purchase. Should you encounter any issues, please contact us for assistance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals