Luxorparts 45154 120W Solar Panel User Manual
- October 26, 2023
- luxorparts
Table of Contents
Become a Dutch Oven Master! |The U...
Become a Dutch Oven Master! |The Ultimate Beginner's Guide to Dutch Oven Cooking
Luxorparts 45154 120W Solar Panel
Specifications
- Cell type: Monocrystalline
- Max. power output: 120W
- Max. voltage: 18.3V
- Max. current: 6.56A
- Idling voltage: 22.0V
- Short-circuit current: 6.99A
- Max. system voltage: 600V
- Size: 990x670x30 mm
- Weight: 7.2 kg
Use
Before first use
As soon as the solar panel is exposed to light or sunlight, the terminals in
the connection box will be conducting electricity. To avoid short circuits
when assembling and connecting the panels, turn them away from sunlight or
cover them so that they are not producing electricity during the connection
procedure. Remove the cover when all the connections have been made.
For full function the panel should be supplemented (sold separately) with:
- Mount
- Charge regulator
- Battery
Assembly
Install the panel in a mount either horisontally or vertically with the
connection box at the top. The solar panel should be facing south at a
vertical angle of 30-40° (summer) and 0-20° (winter).
Choose a location for the panel with as little shade possible since shadows
will reduce the output power.
Connection
Open the connection box on the back of the panel by removing the lid carefully with a screwdriver.
Use a suitable UV-resistant cable, 1.5-4 mm’, depending on the length of the cables and size of the panel. Loosen the cable clamps and thread the cables through. Note the polarity markings on the clamps (1, 2) and connect the wires accordingly. Tighten the cable clamps to secure the cable. Coat the wires and terminal posts with Vaseline to protect them from corrosion. Close the lid of the connection box tightly to prevent moisture from entering, this is especially important if the panel is to be used in a coastal or high air humidity area.
Safety instructions
Always mount the panel on a straight, flat surface.Handle the solar panel with care. Do not try to modify or disassemble the solar panel or its frame yourself. Do not use sharp metal tools or anything that could scratch the surface of the panel. Install the panel in such a way that air can circulate freely around it.
Multi-panel use
12V
To use several panels in a 12 V system, connect them in parallel by connecting
positive and negative between panels prior to connecting to the charge
regulator.
24V
To use several panels in a 24 V system, connect them in series by connecting
the positive of one panel to the next panel negative. The remaining negative
and positive connectors are made to the charge regulator.
Disposal
This symbol indicates that this product must not be disposed of with general household waste. This applies throughout the entire EU. To prevent any harm to the environment or cause health hazards by incorrect waste disposal, the – product must be handed in for recycling so that the material can be disposed of in a responsible manner. When recycling your product, take it to your local collection facility or contact the place of purchase. They will ensure that the product is disposed of in an environmentally sound manner.