TE connectivity KEM-BS Series Three Phase High Performance Emi Filter User Guide

June 16, 2024
TE connectivity

TE connectivity KEM-BS Series Three Phase High Performance Emi Filter

Product Information

Specifications

Electrical Characteristics| Maximum Continuous Operating Voltage| Current Ratings| Operating Frequency
---|---|---|---
High Potential Test Voltage| -440VAC| -520VAC|
Overload Capability| | | 50/60Hz
Line to Ground| 2632VDC for 1 Minute| 2856VDC for 1 Minute|
Line to Line| 1892VDC for 1 Minute| 2236VDC for 1 Minute|
Leakage Current| | |
Rated current for 15 minutes| | | 135% of Rated current

Functional Characteristics

  • Operating Temperature Range: N/A
  • Climatic Category: N/A
  • Termination (Depends on Current Rating): N/A
  • Flammability Corresponding to UL 94 V-0
  • Reference Standards Design Corresponding to UL 60939-3 and CSA 22.2 No.8-13
  • Shock Proof: N/A

TE Ordering Numbers

Catalog Number TE Part Number Weight (Kgs) Termination
7KEMS10ABSD 2-1609967-7 0.7 4
16KEMS10ABSD 3-1609967-0 0.8 4
30KEMS10ABSD 3-1609967-1 0.8 4
42KEMS10ABSD 3-1609967-2 1.2 10
55KEMS10ABSD 3-1609967-3 2 10
75KEMS10ABSD 3-1609967-4 2 16
100KEMS10ABSD 3-1609967-5 3 25
120KEMS10ABSD 3-1609967-6 4 50
150KEMS10ABSD 3-1609967-7 4 50
7KEMS10BBSD 5-1609967-7 0.7 4
16KEMS10BBSD 6-1609967-0 0.8 4
30KEMS10BBSD 6-1609967-1 0.8 4
42KEMS10BBSD 6-1609967-2 1.2 10
55KEMS10BBSD 6-1609967-3 2 10
75KEMS10BBSD 6-1609967-4 2 16
100KEMS10BBSD 6-1609967-5 3 25
120KEMS10BBSD 6-1609967-6 4 50
150KEMS10BBSD 6-1609967-7 4 50

Product Usage Instructions

Installation

  1. Ensure the power supply is disconnected before installation.
  2. Select the appropriate KEM-BS EMI Filter based on the required current rating and voltage.
  3. If using the DIN rail type, ensure that the DIN rail is securely mounted before installing the EMI Filter.
  4. Connect the input and output terminals of the EMI Filter to the corresponding terminals of the motor drive or other application.
  5. Ensure all connections are tight and secure.

Operation
The KEM-BS EMI Filter is designed to reduce electromagnetic interference in motor drive applications. It operates at significant interference levels and provides high performance.

Operating Temperature Range
The operating temperature range of the KEM-BS EMI Filter is not specified in the provided information. Please refer to the product datasheet or contact the manufacturer for more information.

Climatic Category
The climatic category of the KEM-BS EMI Filter is not specified in the provided information. Please refer to the product datasheet or contact the manufacturer for more information.

Flammability
The KEM-BS EMI Filter is designed with UL 94 V-0 flammability rating, ensuring high resistance to ignition and self-extinguishing properties.

Reference Standards
The design of the KEM-BS EMI Filter corresponds to UL 60939-3 and CSA 22.2 No.8-13 standards, ensuring compliance with safety and performance requirements.

FAQ

  • Q: What is the maximum continuous operating voltage of the KEM-BS EMI Filter?
    A: The maximum continuous operating voltage of the KEM-BS EMI Filter is 440VAC for the ABSD series and 520VAC for the BBSD series.

  • Q: What is the maximum overload capability of the KEM-BS EMI Filter?
    A: The KEM-BS EMI Filter can handle an overload of 135% of the rated current for 15 minutes.

  • Q: What are the available current ratings for the KEM-BS EMI Filter?
    A: The available current ratings for the KEM-BS EMI Filter range from 7A to 150A, depending on the model.

  • Q: How should I install the KEM-BS EMI Filter?
    A: To install the KEM-BS EMI Filter, follow the provided installation instructions and ensure that the power supply is disconnected. Select the appropriate filter based on the required current rating and voltage. Connect the input and output terminals securely.

KEM-BS SERIES
THREE PHASE HIGH PERFORMANCE EMI FILTER

BOOKSHELF TYPE SINGLE STAGE DELTA CONFIGURATION

INTRODUCTION
Bookshelf design for motor drive applications requiring minimum space and convenient installation with high performance at significant interference levels

APPLICATION

  • Industrial Automation
  • HVAC
  • CNC Machines

FEATURES

  • 3 Phase filters for Drives/Invertors
  • Bookshelf Design
  • Chassis Mounting
  • High Performance

APPROVALS AND COMPLIANCE

  • UL Recognised
  • CSA Certified

Specifications

Electrical Characteristics

Maximum Continuous Operating Voltage| 440/520VAC
Current Ratings| 7A to 150A @40°C, Din Mount 7A to 100A @40°C
Operating Frequency| 50/60Hz
High Potential Test Voltage -440VAC| Line to Ground 2632VDC for 1 Minute
Line to Line 1892VDC for 1 Minute
High Potential Test Voltage -520VAC| Line to Ground 2856VDC for 1 Minute
Line to Line 2236VDC for 1 Minute
Overload Capability| 135% of Rated current for 15 minutes
Functional Characteristics

Operating Temperature Range| -25°C to +85°C
Climatic Category| 25/85/21
Termination (Depends on Current Rating)| Shock Proof
Flammability Corresponding to| UL 94 V-0
Reference Standards

Design Corresponding to| UL 60939-3 and CSA 22.2 No.8-13

Selection Table – Standard Version

TE Ordering Number| **Catalog Number| Rated Current @40°C| Rated Voltage @40°C| Leakage Current (mA)| Weight (Kgs)| ****Termination**
---|---|---|---|---|---|---
2-1609967-7| 7KEMS10ABSD| 7A| 440 VAC| 5| 0.7| 4
3-1609967-0| 16KEMS10ABSD| 16A| 440 VAC| 5| 0.8| 4
3-1609967-1| 30KEMS10ABSD| 30A| 440 VAC| 5| 0.8| 4
3-1609967-2| 42KEMS10ABSD| 42A| 440 VAC| 10| 1.2| 10
3-1609967-3| 55KEMS10ABSD| 55A| 440 VAC| 10| 2| 10
3-1609967-4| 75KEMS10ABSD| 75A| 440 VAC| 10| 2| 16
3-1609967-5| 100KEMS10ABSD| 100A| 440 VAC| 10| 3| 25
3-1609967-6| 120KEMS10ABSD| 120A| 440 VAC| 10| 4| 50
3-1609967-7| 150KEMS10ABSD| 150A| 440 VAC| 10| 4| 50
5-1609967-7| 7KEMS10BBSD| 7A| 520 VAC| 5| 0.7| 4
6-1609967-0| 16KEMS10BBSD| 16A| 520 VAC| 5| 0.8| 4
6-1609967-1| 30KEMS10BBSD| 30A| 520 VAC| 5| 0.8| 4
6-1609967-2| 42KEMS10BBSD| 42A| 520 VAC| 10| 1.2| 10
6-1609967-3| 55KEMS10BBSD| 55A| 520 VAC| 10| 2| 10
6-1609967-4| 75KEMS10BBSD| 75A| 520 VAC| 10| 2| 16
6-1609967-5| 100KEMS10BBSD| 100A| 520 VAC| 10| 3| 25
6-1609967-6| 120KEMS10BBSD| 120A| 520 VAC| 10| 4| 50
6-1609967-7| 150KEMS10BBSD| 150A| 520 VAC| 10| 4| 50

Selection Table – Din Rail Mount

TE Part Number| Catalog Number| Din Type| Rated Current @40°C| Rated Voltage @40°C| Leakage Current (mA)| Weight (Kgs)| Termination
---|---|---|---|---|---|---|---
8-1609967-1| 7KEMS10ABSDDM| DUAL| 7A| 440 VAC| 5| 0.8| 4
8-1609967-2| 16KEMS10ABSDDM| DUAL| 16A| 440 VAC| 5| 0.9| 4
8-1609967-3| 30KEMS10ABSDHM| HORIZONTAL| 30A| 440 VAC| 5| 0.9| 4
8-1609967-4| 42KEMS10ABSDHM| HORIZONTAL| 42A| 440 VAC| 10| 1.3| 10
8-1609967-5| 55KEMS10ABSDHM| HORIZONTAL| 55A| 440 VAC| 10| 2.1| 10
8-1609967-6| 30KEMS10ABSDVM| VERTICAL| 30A| 440 VAC| 5| 1| 4
8-1609967-7| 42KEMS10ABSDVM| VERTICAL| 42A| 440 VAC| 10| 1.4| 10
8-1609967-8| 55KEMS10ABSDVM| VERTICAL| 55A| 440 VAC| 10| 2.2| 10
8-1609967-9| 75KEMS10ABSDDM| DUAL| 75A| 440 VAC| 10| 2.2| 16
9-1609967-0| 100KEMS10ABSDDM| DUAL| 100A| 440 VAC| 10| 3.2| 25
7-1609968-2| 7KEMS10BBSDDM| DUAL| 7A| 520 VAC| 5| 0.8| 4
7-1609968-3| 16KEMS10BBSDDM| DUAL| 16A| 520 VAC| 5| 0.9| 4
7-1609968-4| 30KEMS10BBSDHM| HORIZONTAL| 30A| 520 VAC| 5| 0.9| 4
7-1609968-5| 42KEMS10BBSDHM| HORIZONTAL| 42A| 520 VAC| 10| 1.3| 10
7-1609968-6| 55KEMS10BBSDHM| HORIZONTAL| 55A| 520 VAC| 10| 2.1| 10
7-1609968-7| 30KEMS10BBSDVM| VERTICAL| 30A| 520 VAC| 5| 1| 4
7-1609968-8| 42KEMS10BBSDVM| VERTICAL| 42A| 520 VAC| 10| 1.4| 10
7-1609968-9| 55KEMS10BBSDVM| VERTICAL| 55A| 520 VAC| 10| 2.2| 10
8-1609968-0| 75KEMS10BBSDHM| DUAL| 75A| 520 VAC| 10| 2.2| 16
8-1609968-1| 100KEMS10BBSDHM| DUAL| 100A| 520 VAC| 10| 3.2| 25

Connectors Cross Section

4                                     10 16                                       25 50

Wire Section (mm2)| 4mm2| 10 mm²| 16 mm²| 25 mm²| 50 mm²
Wire Section (AWG)| 12AWG| 8 AWG| 6 AWG| 4 AWG| 1/0 AWG
Wire Stripping| max 10mm| max 13.5 mm| max 17 mm| max 17 mm| max 20 mm
Max Recommended Torque| 0.5 Nm/
4.5 in.lbs| 1.2 Nm/
10.8 in.lbs| 2-2.2 Nm/ 18-
19.8 in.lbs| 2 Nm/
18 in.lbs| 6 Nm/
54 in.lbs

Insertion Loss (Typical) – Measured in Closed 50Ω System

| Common Mode 50 Ù /50 Ù
---|---
**0.01| ****0.05| ****0.15| Frequency in MHz
0.5 1 3| ****5| ****10| ****30
Current Rating| 7A| 54| 56| 48| 71| 82| 70| 65| 40| 16
16A| 42| 34| 46| 80| 73| 48| 40| 29| 13
30A| 40| 26| 47| 70| 73| 51| 44| 34| 13
42A| 20| 13| 46| 78| 69| 50| 42| 32| 12
55A| 24| 28| 32| 73| 66| 56| 48| 36| 19
75A| 23| 32| 36| 71| 67| 60| 54| 30| 17
100A| 21| 32| 36| 69| 58| 56| 50| 30| 17
120A| 19| 28| 33| 70| 60| 56| 49| 26| 18
150A| 20| 20| 31| 65| 40| 28| 24| 19| 11
|
Differential Mode 50 Ù /50 Ù
---|---
****
0.01| ****0.05| ****0.15| Frequency in MHz
0.5 1 3| ****5| ****10| ****30
Current Rating| 7A| 30| 32| 40| 69| 54| 50| 48| 34| 25
16A| 28| 30| 42| 79| 81| 58| 43| 8| 22
30A| 28| 21| 37| 76| 82| 67| 49| 20| 28
42A| 18| 21| 35| 83| 74| 64| 45| 13| 27
55A| 22| 30| 34| 69| 70| 58| 40| 49| 22
75A| 38| 40| 45| 86| 81| 68| 50| 49| 35
100A| 36| 40| 47| 80| 75| 62| 54| 50| 35
120A| 32| 35| 45| 78| 72| 60| 54| 47| 31
150A**| 31| 30| 34| 48| 39| 28| 23| 17| 15

Common Mode Insertion Loss (Typical in dB – Refer to table above)

Common Mode Insertion Loss (Typical in dB – Refer to table above)

Case Dimensions – Standard Version

Case Dimensions – Din Rail Mount

HOW TO ORDER

te.com
©2022 TE Connectivity. All Rights Reserved.

  • TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners.
  • The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However,
  • TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in
  • TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.

INDUSTRIAL / KEM-BS SERIES

Documents / Resources

| TE connectivity KEM-BS Series Three Phase High Performance Emi Filter [pdf] User Guide
75KEMS10BBSD, 7KEMS10BBSD, 16KEMS10BBSD, 30KEMS10BBSD, KEM-BS Series Three Phase High Performance Emi Filter, Three Phase High Performance Emi Filter, High Performance Emi Filter, Performance Emi Filter, Emi Filter, 42KEMS10BBSD, 55KEMS10BBSD, 75KEMS10BBSD, 100KEMS10BBSD, 120KEMS10BBSD, 150KEMS10BBSD
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

TE connectivity User Manuals

Related Manuals