Guanyu GY-Z6D 3-In-1 Fast Wireless Charger User Manual

June 6, 2024
Guanyu

Guanyu GY-Z6D 3-In-1 Fast Wireless Charger

Notice : To ensure charging 3 devices safely and efficiently, you must use 9V/2A adapter and quick charge cable, if, including ISW!ast charging phones, you must use9V/2.7Aor 12V/2A adapter and quick charge cable (if not use the appropriate adapter and quick charge cable, the charger may not charge phone fast, or may not charge 3 devices simultaneously, or may even damage the charger.

Product Appearance

Product Introduction

The 3-in-1 wiceless charger, a compact charging house, power only one outlet, can charge 3 devices simultaneously. When charge youc mobile phone, apple watches, and your AirPods 2 or AirPods Pro, just put them on, wireless charging will automatically start, all this will make your desk clean and tidy, and make your life easier. The charger is so space-saving designed can help you integrate your mobile phone intelligent and llfe very well, especially for Apple user. Besides, it is fashion that the light is so shining and has a breathing effect showing the charging state

Operation Steps

  1. Connect the charger to a 9/V 2A,9/V 2.7 A or 12V/2A a dap te「througha Type-Quick changeable to switch on the power;
  2. Put your phone on then charge;
  3. Put the apple watch on and suck it up to charge (roll the watch band to minimize to charge better);
  4. Plug your earphone on then charge;Guanyu GY-Z6D 3-In-1 Fast Wireless Charger fig 4 Guanyu GY-Z6D 3-In-1 Fast Wireless Charger fig 3

LED light instructions

  • Greenlight ison:
    Standby mode or not charging the phone

  • Blue light is breathing:
    Wireless changes the phone

  • Blue and Greenlight flash
    A foreign body is detected or the phone is misaligned (the phone charging will automatically stop)

Charging Schematic Diagram

Guanyu GY-Z6D 3-In-1 Fast Wireless Charger
fig 4

Applicable Devices
I.Smart Phone

  1. Apple: iPhone 12,12 Pro,12 Pro Max,12 mini,SE,11,11 Pro,11 Pro Max, Xs,Xs Max,XR,X,8,8 Plus,
  2. Samsung: Galaxy S: 20 SG,20+ SG,20 Ultra SG,10,10+, lOe,9,9+,B,B+,7,7 edge,6,6 edge, 6 edge+, 6 G9209,6 Active;Galaxy Note:10,lOe,10+,9,8,7,6,5;
  3. LG: G2(VS980,Verizon ve「sion),G3,G6,G6+,G7,G7 ThinQ,G7+ Thi nQ,GB,GB Th inQ,V30, V30+,V35,V40 ThinQ,V50, V50ThinQ, LG Lucid2 (VS870),LG Optimus F5 (As870),LG Optimus Vu 3,Spectrum 2,0ptimus G Pro,Optimus Vull,Optimus LTE 2,etc
  4. MOTOROLA: Droid Turbo, Droid Turbo2, Droid 5, Moto Maxx, Ultra M, Moto X Force
  5. Huawei: P40 Pro, P30 Pro; Mate:30 SG,30 Pro SG,30,30 Pro, 30 RS,20 Pro,20 RS, RS,
  6. Xiao mi: 10,10 Pro,9,9Pro,Mix 3,Mix 2s; Including other devices with wireless charging receiver built一in, other some devices need to add a wireless charging receiver

(Note: All devices must meetthe Qi standard)

  • SmartWatch:
    Apple: iWatch Sl,S2,S3,S4,S5,S6,SE

  • Earphone:
    Apple: Ai rPods 2, Air Pods Pro;

Product Specification

Input: 9V/2A,9V/2.7Aorl2V/2A (must use 9V/2.7A or 12V/2Awhen charging3 devices including 15W charging phone)
Phone Output: 15W/10W/7.5W/5W
Watch Output: 2.5W (Apple iWatch Sl,S2,S3,S4,S5,S6,SE)
Earphone Output: 3W (TWS Earphone: Apple AirPods 2, Pro; and more)
Input Interface: Type-C port
Transmission Distance(Phone):’s8mm
Conversion Rate(Phone):,>73%
Prod uct Size:142X70Xl8. 7mm

Accessories List
Wireless Charger· 1. Type-C quick charge cabte·1. User manual’l

  1. Attention.Please keep the charger away from water or other liquid;
  2. 11 you need to clean the charger, please make sure比is not connected power supply,
  3. Using Environment temperature remains 0-45’C
  4. Charging environment of smartphone will not be,;; ss·c (,;;131’F)

Answer questions

  • lf you’re experiencing interrupted or slow charging, check the following:
1. The back of you「phone shou Id not have any meta I, pop sockets, or credit cards
2. Put the phone in the center of the charging surface (this lets the charging coil in you「phone line up with the one inside the wireless charge门.
3. The wireless charging coil on Sony phones is located slightly below center
4. Phone cases should be no thicker than 5 mm for effective charging.
5. Check whether the adapter is QC3.0 fast cha「ger
  • lf you’refa小ng to charge your device, please try out the following
1. Please restart your cell phone and test with another USB cable
2. Please check whether the indicator turns on or not.
3. Please check the Adapter is QC3.0 Quick Charge『(Output:9V /2A) or not, iPhone original adapter does not match the wireless charger.
4. Please checkyou「Phone case thickness(<=Smm). Metal ring or Magnetic Pad w仆I not be available.
  • lf you’re using the recommended wireless charger with the QC3.0 Adapter and have removed any potential charging obstructions, but are still experiencing issues, try:
1. Replacing the cable connecting your the wireless charger
2. Rebooting your phone.
3. Unplug the adapter and reinsert

FCC Statement

This device complies with part 15 FCC Rules. Operation is Subject To the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC radiation exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be
respected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals