Scosche MWDM2PK-UB MagicMount Magnetic Car Phone Holder Mount Instruction Manual
- June 6, 2024
- Scosche
Table of Contents
Scosche MWDM2PK-UB MagicMount Magnetic Car Phone Holder Mount
LOW-PROFILE DASH MOUNT FOR MOBILE DEVICES
| Questions?
Need help with your Product? Call Customer Service
at:800-363-4490 x1
---|---
Please Note
This product is not for use with hard-drive based MP3 players, including iPod
and Zune. Incorrect use of this product may result in damage and will not be
covered under the terms of the limited warranty.
PARTS INCLUDED
- (1) Low-profile magnetic mount
- (1) Small metal plate
- (1) Large metal plate
- (1) Protective film
- (1) Cleaning wipe
Register your product online atwww.scosche.com/register
SUPPORT DISCRET POUR TABLEAU DE BORD POUR LES APPAREILS MOBILES
CONTENTS/FEATURES
A. MAGICMOUNT™ Magnetic Mount
CAUTION: This magnetic mount is not a toy. The small magnets are harmful
if swallowed. Keep away from children.
1a. Integrated Cable Management Hook
B. Low-Profile Mount (Rotates 90° for placement on horizontal surfaces)
1b. Flex Tabs (for curved surfaces)
Note: Carefully pre-bend the tabs 1-2 times before applying to the curved
surface.
2b. Ball-Joint Angle Adjustment (Rotate ball-joint clockwise to loosen
and adjust mount)
3b. Adhesive Backing
C. MAGIC PLATE™ Metal Plates (small & large)
D. Protective Film
E. Cleaning Wipe
MAGICPLATE™ INSTA LLATION
-
OPTION 1
Remove the backing from the protective film as shown on the removal tabs, and place on the device (A).
Note: The protective film must be used when applying MAGICPLATE™ directly to the back of your device. Remove the adhesive backing from the metal plate and attach the plate to the protective film on the device (B). -
OPTION 2
Attach adhesive side of metal plate directly to back of case -
OPTION 3
Attach adhesive side of metal plate to interior of case, between device and inside of case. Plate will adhere toe magnetic mount through rear panel of case.
**NOTE: If choosing not to attach the metal plate to the device or case, please leave the adhesive backing in place. Position the plate between the device and interior of case with the metal surface facing the case.
**
MAGIC PLATE **™placement for Qi-enabled Smartphones
**
MAGICPLATE™ & LOW-PROFILE MOUNT REMOVAL
Use a thin plastic card to carefully lift the plates adhesive surface from the mounting surface. Slowly lift up and remove the plate. Do not use any heat or liquids to remove the plate, due to risk of damaging your phone or dash. Contact Scosche Customer Service for any additional assistance at 800.363.4490 Ext. 1 orcustomerservice@scosche.com.
LOW-PROFILE MOUNT
-
Clean the dash surface with supplied cleaning wipe*.
*Note: Wipe may cause discoloration of certain plastics, vinyls and painted surfaces. It is recommended to test in an inconspicuous area first.
-
Peel the adhesive backing from the bottom of the mounting base, and place in position. Apply firm pressure.
-
Peel the adhesive backing from the bottom of the mounting base, and place in position. Apply firm pressure.
-
Attach device to magnetic mount.
For complete warranty details, please visit us atwww.scosche.com or call 800-363-4490
References
- Scosche Tech Accessories | #1 Mount Brand in US & Canada
- Product registration | Register your purchase
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>