PETLIBRO PLWF001 Automatic Pet Water Fountain User Guide
- June 6, 2024
- PETLIBRO
Table of Contents
PETLIBRO PLWF001 Automatic Pet Water Fountain
A Thank you for purchasing our products; your satisfaction is very important
to us. If you have any questions regarding
this product, please feel free to contact us. This Lotus Lantern App allows
you to interact, customized and control your RGB LED Light. Using bluetooth
wireless technology change the colors and brightness of your RGB LED Light all
from your smart phone. Additionally, take advantage of our schedule, music to
light sync, shake to random colors and other features that are continously
introduced.
Note:
Before instllation of this App – Lotus Lantern, please check with your phone
or device and make sure which operation system is
Android 4.3 or iOS 9.0 above.
Remote control range distance is within 1 O meters.
Step 1:
After installing your RGB LED Light, download & install ‘Lotus Lantern’ from
Apple Store or Google Play Store or scan the QR code below.
Step 2:
Once installed turn ON your phone’s bluetooth and open the ‘Lotus Lantern’
App.
Home Screen
Group Manage
Make sure your phone or device is succesfully connected with the RGB LED Light.
Shake Selection
The shake feature will randomly select a color everytime you shake your phone.
Modify Pin Sequence
- Select to set up a new color setting.
- Click to save on when selection completed.
RGB Value Setup
- Click to open the interface of the RGB Value Setup.
- Slide the R – G – B progress bar to change the RGB value.
- Or press the button minus ‘-‘ or plus ‘+’ to change the RGB value.
- Click ‘Cancel’ or ‘OK’ when setup completed.
Style
This Style Interface has a variety of functions, including Static colors,
Color Jumping Change, Color Cross Fade and etc.
Below is a slider progress bar that will adjust the rate in which the selected
function will operate at.
Music
Select the Music mode to play music with the RGB LED Light. The brightness and colors will randomly changed base on the music.
Phone MIC
Voice control and music are also options that are able to be selected to alter the characteristics of the RGB LED Light, adjusting the brightness in sync with the volume of the selected audio input from Phone or External MIC.
External MIC
Schedule
This Schedule Interface will allow you to set alarms that once reached will
turn the RGB LED Light on or off.
To set a specific run period just set a time to switch on and a separate time
after which will turn the off.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and (
- this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>