PETLIBRO PL-AF203-03B Granary WiFi Stainless Steel Dual Food Tray 5L Automatic Dog and Cat Feeder User Guide
- October 30, 2023
- PETLIBRO
Table of Contents
PETLIBRO PL-AF203-03B Granary WiFi Stainless Steel Dual Food Tray 5L
Automatic Dog and Cat Feeder
ENABLE THE VIDEO RECORDING
To enable the video recording function, insert a TF card (not included) first, then enable the Local Recording option in the APP: tap the icon in the upper right corner Recording Settings Local Recording.
Note:
For the first time with the feeder, please use APP to format the TF card in
settings.
- Open the battery compartment, the TF card slot is in the middle of the battery compartment.
- Insert the TF card in the direction shown. Slide it in until it clicks into place. Do not force or apply excessive force when inserting the TF card.
- If the feeder is only powered by batteries, the WiFi function and camera function will be turned off and the user will not be able to remotely control the feeder through the App.
- Keep the feeder close to the router. The recommended distance is within 6 meters without obstacles and walls. Make sure the network signal is good.
- If the configuration fails, please restart and reset the feeder (press and hold the reset button for 5s) until the WiFi indicator keeps flashing.
- The feeder supports 2.4GHz and 5GHz WiFi.
- System requirements: iPhone on iOS 10.0 or later; smartphone on Android 5.0 or later.
- We support TF card capacity 16-256GB, speed Class10 or above, and suggest brands like Samsung and SanDisk.
- Please contact our after-sales team via email: support@petlibro.com for any help.
ADD THE FEEDER VIA BLUETOOTH MODE
Install the APP & Log in
-
Scan the QR code below or search “PETLIBRO LITE” in App Store or Google Play to download the App.
-
Sign up and log into your account.
-
Open the App, select the Home page, and tap “Add Device” or +’ in the upper right corner.
-
Choose PLAF203 Camera Feeder.
-
Tap the icon in the top right corner and choose Bluetooth mode.
-
Follow the instructions on the screen, and confirm the WiFi indicator on the feeder is flashing.
(Note: If the WiFi indicator on the feeder is not flashing, hold the Unlock Button for 5s to unlock, and the lock indicator goes out. Keep holding the reset button until the WiFi indicator keeps flashing.) -
Add the device PLAF203 by entering your WiFi account and password.
-
Feeder connected, start to set the feeding time and portions, record the voice of meal call, and set the number of times this voice is played.
Note:
If Bluetooth mode sometimes fails, you can try adding feeders in QR code or AP
mode.