Guanyu GY-Z13 2 In 1 Magnetic Wireless Charger User Manual

Guanyu GY-Z13 2 In 1 Magnetic Wireless Charger

PRODUCT APPEARANCE

OPERATION GUIDE

1. Connect the charger to a 9V/2AOC3.0 adapter through a Type-C quick charge cable to sv. itch on the power
2. Put the mo切le phone v,the magnetic suction function nea「the cha「g1ng a「ea of the wireless mobile phone, and it ..;11 automatically absorb the mobile phone for charging.
3. Place your headphones in the headphone charging area to recharge

LED STATUS INDICATION

CHARGING SCHEMATIC DIAGRAM

WIRELESS CHARGING  OF MULTIPLE DEVICE

PRODUCT SPECIFICATION

• Input 9V(2A
• Phone Output 15W /10W /7.5W / 5W
• Earphone Output 3 OW
• USS Output 5VA
• lnput lnterface: T炉e-Cp可t
• Transmission Distance(Phone): ,;;8mm
• Conversion Rate(Phone)·;,, 73%
• Product Size: 156. 75×91 x91 (mm)

ACCESSORIES LIST
Wireless Charger1, Type-C quick charge cable1, User manual*1

APPLICABLE DEVICES

1. SmartPhone Magnetic alignment is only available for iPhone 12 models (iPhone 12, 12 mini, 12 Pro,12 Pro Max} Mobile phones that support Qi wireless charging standard
2. Earphone: pods 2/P「a.Other TWS earbuds support 1Mreless charging
3. Compatible iPhone 12 Case(Magsafe Silicone Case /M a safe Clea「 Case)

SAFETY INSTRUCTIONS

1. Charging de\oices that meet the Qi charging standard
2. Charging output maximum power fast charging 1 SW, compatible叭th fast charging 10W,7.5W, and gene「al charging 5W.
3. Magnetic calibration adsorption, the mobile phone automatically adsorption charging put on.
4. Safety guarantee overheating p「otection, overcurrent protection

WARNING

1. Do not pull the power cord hard to avoid the power cord from breaking or falling off
2. Do not disassemble by yourself sorrow it into fire or water to avoid short circuit and leakage
3. Do not use in severely high temperature, hum心ty or corrosive environments to avoid leakage of electricity due to damage to the circuit.
4. When using 1his product, keep a distance of more than 50cm from 1he pacemak
5. Only use the wireless receiver confo「ming to Qi standard to connect \\’ ith the transmitting terminal
6. The environment tempe「ature of the charger is -10°C-30°C.
7. Do not place the magnetic ca「d, magnetic recording medium and precision machine too close to the cha「ge.
8. Keep out of reach of children

ANSWER QUESTIONS

1. If you’re experiencing interrupted or slow charging, check the following

2. The back of your phone should not have any metal, pop sockets, or cred仆 cards.

3. Put he phone,n the cente「of the cha「g,ng surface (this lets the cha「g,ng coil in your phone lineup v,,ith the one inside the v,,wireless cha「ge「)

4. The wireless cha「ging coil on Sony phones is located sligh1ly below the center.

5. Phone cases should be no thicke「than 5 mm for effective cha「ging

6. Check劝ether lhe adapte「1sQC3.0 fast charger

7. If you’re failing to charge your device, please try out the following

8. Please restart your cell phone and test with another USS cable.

9. Please check whether the indicator turns on or not

10. The wireless charging coil on Sony phones is located ,highly below center

11. Phone cases劝ould be no unlocker lean 5 mm fa, effective charging

12.  Check v.11elher lhe adapter Is QC3.0 fast charger

13. If you’re failing to charge you「device, please try out the following

14. Please 「estart you「cell phone and test with another USB cable

15. Please check whethe「the indicato「turns on or not

16. Please check lhe心apte「1sQC3.0 Quick Charger (Output9V(2A) or not iPhone original adapter does not match lhe wireless cha「ge「.

17. Please check your Phone case thickness(s5mm) Metal ring or Magnetic Pad will not be available

18. lf you’re using们e recommended WI卤ess charger WI们theQC30心apter and have removed any potential charging obstructions, but are still experiencing issues, try

19. Replacing the cable connecting your wireless charger.

20. rebooting your phone

21. Unplug the adapter and reinsert

22. Charging is still slow: The mobile phone itself or the external receiving coil allo’NS lhe Wireless Bcharging current to be different, or the application running consumes a lot of power劝en the mobile phone is charging It is 「ecommended to reduce or close the application

23. The phone is charging intermittent”y; or the indicator light flashes: If the charging current is not enough, please use a charging head (adapter)
    ‘Nith sufficient po归9V/2A or 1 BW above.

24. Charging fever lt is no「mal for the receiving coil or transmitte「board to generate heat during w「eless cha「ging. If the plate is toom, take you『phone off the plate, and sv,, itch the plate off. The plate may SV,, itch off automaticaly巾t is too hot when the plate has cooled do，try charging again

25. The charger does not欢 Do not put metal debris or m Magnetic cards on the charging area If the product does not work due to overheating please take off the phone and wait for it to cool do叨and try charging again

26. If tt, eh est fails, contact afte「-sales maintenance.

FCC Statement

This device complies with part 15 FCC Rules. Operation is Subject To the
following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
the device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC radiation exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>