SureCall Fusion2Go 3.0 Fleet Vehicle Voice and 4G LTE Data Signal Booster User Manual

Fusion2Go 3.0 Fleet Vehicle Voice and 4G LTE Data Signal Booster
User Manual

Thank you for purchasing SureCall’s Fusion2Go 3.0 cell phone signal booster kit. Fusion2Go 3.0 Fleet provides enhanced voice, text, and 4G data signal for any vehicle.

If you have any questions during setup, please reach out to our US-based experienced support technicians:

• Call: 1-888-365-6283
• Email: [email protected]

Please note: This product is designed for professional installation as the antenna is mounted permanently through a hole drilled into the vehicle’s sheet metal.
A “soft installation” should first be performed by assembling the NMO antenna and routing the cable through an open window. After completing the remaining installation steps and successful operation is verified, proceed with a permanent installation.

How It Works

The SureCall Fusion2Go 3.0 Fleet is a high-quality bidirectional booster that enhances cellular signals for vehicles.

The Fusion2Go 3.0 Fleet works with two antennas:

• An inside antenna that communicates with your cell phone.
• An outside antenna that communicates with the cell tower.

Signals sent from a cell tower are received by the outside antenna, amplified by the booster, and then sent to your cell phone via the inside antenna. When your phone transmits,  the signal is sent to the inside antenna, and then sent to the cell tower via the outside antenna.

Package Contents

• Unpack all package contents. For missing or damaged items, contact your reseller.
• Turn over the signal booster and record the model and serial number for reference:

Serial #:

Purchase Date:

• Keep the carton and packing material to store the product in case you need to return it.

Your Fusion2Go 3.0 Fleet signal booster package includes the following items:

1. One SureCall Fusion2Go 3.0 signal booster
2. 12v Hardwire power supply
3. One inside patch antenna
4. One outside nonmagnetic NMO antenna
5. NMO mounting cable

Step 1: Mount Outside Antenna

Identify a location on the vehicle’s roof that (1) has at least a 12-inch radius clear of obstructions and other radiating elements, such as a radio antenna and (2) at least 6 inches away from any windows.
Using a drill with a 3/4” hole saw bit, drill a hole in the center of the desired location. Remove the metal collar from the connector and insert the NMO mounting cable through the hole. (see illustration).
Position threads of the cable mount to extend through the center of the drilled hole and above the vehicle surface.
Screw the collar to the base mount, ensuring the mount is centered and tightened with a wrench. Next, thoroughly clean the mounting area before screwing the antenna onto the
NMO mount. Ensure full contact of the antenna to the vehicle surface.
Note: The outside antenna must not be collocated or operating with any other antenna or booster.
Once the antenna installation is complete, route the NMO antenna cable inside the vehicle.
To hide the cable, run under the headliner and trim to the desired booster location on the floor of the vehicle.
Note: The outside antenna must not be collocated or operating with any other antenna or booster.

Step 2. Install the Inside Patch Antenna

Identify a location for the inside antenna on or near your front dashboard that is

1. Within 2-3 feet of the typical cell phone location
2. At least 8 inches (20cm) from cellular devices and
3. At least 4 inches (10cm) from metal

Next, peel Velcro backing and apply it to a clean dry surface in your chosen location.
Or try this – Use the free vent clip provided with your product as a mounting surface then simply clip to an air vent.

Step 3. Place Booster and Connect Cables

Select a well-ventilated location for the booster that is away from excessive heat, direct sunlight, and moisture. We often suggest installing beneath a seat or within the front console.
Connect the cable from the outside antenna to the connection marked OUTSIDE and connect the cable from the inside patch antenna to the connection marked INSIDE. Tighten the connections and wrap up any loose cable.

Step 4. Connect Power

Before and while wiring the power supply, disconnect the vehicle battery. Hardwire installation requirements vary by vehicle. The following is only a general guide. Check with your manufacturer’s vehicle for specific electrical placement or requirements.
Locate a +12V accessory (“ACC”) wire that will switch on and off with the ignition. Connect to the power source and ground.
Once connections are complete, verify operation by connecting the DC power cord connector to the signal booster. The Power LED on the signal booster will illuminate to indicate it is receiving power and is ready for use. Permanently secure power cable.
Then, connect the power cord to the signal booster.
The Power LED illuminates to show that the signal booster is ready for use. The Alert LEDs flash 5 times to show the frequency band is operational.
Place a call in a location you have previously experienced poor signal and confirm that your phone is receiving a boosted signal.
[1] WARNING: The booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply.
This can damage the booster and/or cause personal injury.

LED Indicators

Place a call in a location you have previously experienced poor signal and confirm that your phone is receiving a boosted signal. Normal operation is indicated by Green LEDs  (both flashing and solid). In the event Red LEDs appear, antenna adjustments may be needed.

(AGC) is self-adjusting due to over-signal or antenna proximity.
Red| Flashing| Indicates issues caused by overpowering or oscillation.
Adjustment of your outside antenna placement is likely needed. Verify that it has sufficient separation from the inside antenna, as well as, any potentially interfering objects or antennas

Note that the booster case may become warm during operation. This is normal.

Troubleshooting

2. Connect the power supply to an alternate power source.
3. Verify that the power source is operational and the fuse is intact.
4. If it remains OFF, contact tech support at: 1-888-365-6283 or [email protected]
After completing the installation, the signal has not Improved| Verify that cable connections are tightly fitted to the booster. Try further separating the antennas.
Note: Bars are not always a reliable measure of the signal. The best way to confirm signal coverage is the ability to place and hold a call.

Note: The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.

Antenna Kitting Information

/ NG
Outdoor Antenna and Cable| SC200W
and SC174-10 ft (10 ft)| -2.3 dB| -2.3 dB| -2.3 dB| -5.8 dB| -3.98 / -5.96 dB
Indoor Antenna and Cable| SC110W
and SC174-10 ft (10 ft)| -2.7 dB| -2.7 dB| -3.2 dB| -5.8 dB| -3.98 / -5.96 dB

*All equivalent antennas and cables are suitable for use with the Fusion2Go 3.0

dB
Indoor Antenna| SC120W whip| 1.2 dB| 1.2 dB| 1.2 dB| 3 dB| 3/3 dB
Indoor Antenna and Cable| SC302W
and SC240-20FN (20 ft)| 0.44 dB| 0.44 dB| 0.71 dB| 1.44 dB| 0.64 / 1.24 dB

*All equivalent antennas and cables are suitable for use with the Fusion2Go 3.0

• Warning: Unauthorized antennas, cables, and/or coupling devices are prohibited by FCC’s new rules. Changes or modifications not expressly approved by SureCall could void the user’s authority to operate the equipment.
• FCC 27.50(d)(4) Statement: Fixed, mobile, and portable (hand-held) stations operating in the 1720-1755 MHz band are limited to 1 Watt EIRP. Fixed stations operating in this band are limited to a maximum antenna height of 10 meters above the ground. Mobile and portable stations operating in this band must employ a means for limiting power to the minimum necessary for successful communications.
  When used with any mobile device utilizing the 1710-1755 MHz band, the FCC limits booster equipment placement to a maximum of 10 meters above ground level. Installation of this equipment that does not comply with federal requirements may subject the owner to FCC enforcement action.

| PreAGC| PreAGC
---|---|---
| Pulse GSM| 4.1 MHz AWGN
Frequency (MHz)| Input (dBm)| Output (dBm)| Gain (dB)| Input (dBm)| Output (dBm)| Gain (dB)
Uplink: 1710-1755| -27.2| 20.0| 47.2| -25.3| 21.7| 46.0
Uplink: 1850-1915| -25.6| 20.9| 46.5| -25.9| 19.6| 45.5
Uplink: 824-849| -25.3| 22.3| 47.6| -21.7| 25.6| 47.3
Uplink: 698-716| -24.1| 28.0| 47.1| -20.1| 26.6| 46.7
Uplink: 777-787| -21.3| 25.6| 46.9| -20.5| 25.9| 46.4
| | | | | |
Downlink: 2110-2155| 46.4| -3.7| 44.8| -49.4| -4.5| 44.9
Downlink: 1930-1995| -45.7| 1.0| 46.7| -46.7| 0.2| 46.9
Downlink: 869-894| -51.1| -5.5| 45.6| -51.6| -5.8| 45.8
Downlink: 728-746| -48.0| -0.3| 47.7| -48.4| -1.8| 46.6
Downlink: 746-757| -49.4| -2.8| 46.6| -50.9| -4.3| 40.6

FCC 15.105 Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Consumer Guidelines

This is a CONSUMER device

BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
In Canada, BEFORE USE you must meet all requirements set out in ISED CPC-2-1-05¹
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from (i.e. MUST  NOT be installed within 20 cm of) any person.
You MUST cease operation of this device immediately if requested by the FCC (or ISED in Canada) or a licensed wireless service provider.
WARNING: E911 location information may not be provided or may be inaccurate for calls served by using this device.

Register your cellular booster with your wireless carrier at the following URLs:

Verizon: http://www.verizonwireless.com/wcms/consumer/register-signal- booster.html
AT &T: https://securec45.securewebsession.com/attsignalbooster.com/
T-Mobile: https://support.t-mobile.com/docs/DOC-9827
Sprint: https://www.sprint.com/legal/fcc_boosters.html
U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster- registration.jsp

CAN ICES-3 (B)/NMB-3(B) (Canada) :
This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

1. For details on the requirements specified in ISED CPC-2-1-05, visit: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html

Three-Year Product Warranty

Register atwww.SureCall.com/Activate
SureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifications are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014.
Products returned by customers must be in their original, unmodified condition, shipped in the original or protective packaging with proof-of- purchase documentation enclosed, and a Return Merchandise Authorization (RMA) number printed clearly on the outside of the shipping container.
Buyers may obtain an RMA number for warranty returns by calling the SureCall Return Department toll-free at 1-888-365-6283. Any returns received by SureCall without an RMA number clearly printed on the outside of the shipping container will be returned to the sender. In order to receive full credit for signal boosters, all accessories originally included in the signal booster box must be returned with the signal booster. (The Buyer does not need to include accessories sold in addition to the signal booster, such as antennas or cables.)
This warranty does not apply to any product determined by SureCall to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages the product’s physical or electronic properties.
SureCall warrants to the Buyer that each of its products, when shipped, will be free from defects in material and workmanship, and will perform in full accordance with applicable specifications. The limit of liability under this warranty is, at SureCall’s option, to repair or replace any product or part thereof which was purchased up to THREE YEARS after May 1, 2014, or TWO YEARS for products purchased before May 1, 2014, as determined by examination by SureCall, prove defective in material and/or workmanship. Warranty returns must first be authorized in writing by SureCall. Disassembly of any SureCall product by anyone other than an authorized representative of SureCall voids this warranty in its entirety. SureCall reserves the right to make changes in any of its products without incurring any obligation to make the same changes on previously delivered products. As a condition to the warranties provided for herein, the Buyer will prepay the shipping charges for all products returned to SureCall for repair, and SureCall will pay the return shipping with the exception of products returned from outside the United States, in which case the Buyer will pay the shipping charges.
The Buyer will pay the cost of inspecting and testing any goods returned under the warranty or otherwise, which are found to meet the applicable specifications or which are not defective or not covered by this warranty.
Products sold by SureCall shall not be considered defective or non-conforming to the Buyer’s order if they satisfactorily fulfill the performance requirements that were published in the product specification literature, or in accordance with samples provided by SureCall. This warranty shall not apply to any products or parts thereof which have been subject to accident, negligence, alteration, abuse, or misuse. SureCall makes no warranty whatsoever in respect to accessories or parts not supplied by it.

Limitations of Warranty, Damages, and Liability:
EXCEPT AS EXPRESSLY SET FORTH HEREIN, THERE ARE NO WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHER WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS,
WHETHER EXPRESSED OR IMPLIED, IN LAW OR IN FACT, ORAL OR IN WRITING.
SURECALL AGGREGATE LIABILITY IN DAMAGES OR OTHERWISE SHALL NOT EXCEED THE PAYMENT, IF ANY, RECEIVED BY CELLPHONEMATE, INC. FOR THE UNIT OF PRODUCT OR SERVICE FURNISHED OR TO BE FURNISHED, AS THE CASE MAY BE, WHICH IS THE SUBJECT OF CLAIM OR DISPUTE. IN NO EVENT SHALL RECALL BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, HOWSOEVER CAUSED.

All matters regarding this warranty shall be interpreted in accordance with the laws of the State of California, and any controversy that cannot be settled directly shall be settled by arbitration in California in accordance with the rules then prevailing of the American Arbitration Association, and judgment upon the award rendered may be entered in any court having jurisdiction thereof. If one or more provisions provided herein are held to be invalid or unenforceable under applicable law, then such provision shall be ineffective and excluded to the extent of such invalidity or unenforceability without affecting in any way the remaining provisions hereof.
SureCall has made a good faith effort to ensure the accuracy of the information in this document and disclaims the implied warranties of merchantability and fitness for a  particular purpose and makes no express warranties, except as may be stated in its written agreement with and for its customers. SureCall shall not be held liable to anyone for any indirect, special or consequential damages due to omissions or errors. The information and specifications in this document are subject to change without notice.
© 2019. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners.

www.SureCall.com | 1-888-365-6283 | [email protected]

48346 Milmont Drive
Fremont, California 94538, USA
888.365.6283
www.surecall.com

References

• Cell Phone Signal Boosters | Get Better Cell Signal | SureCall
• Activate Your SureCall Warranty
• Register a signal booster | T-Mobile Support
• T-Mobile® Official Site: Get Even More Without Paying More

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>