SureCall Flare 3.0 Cell Phone Signal Booster Instructions
- June 1, 2024
- SureCall
Table of Contents
SureCall Flare 3.0 Cell Phone Signal Booster
Specifications:
- Product: SureCall Flare Signal Booster
- App Compatibility: SureCall App (Available on Google Play and Apple’s App Store)
- Antenna Type: Yagi Antenna
- Cable Length: RGcable (ft)
- Booster Placement: Central location where improved signal is needed
Product Usage Instructions
Setup Overview:
Set up the Yagi antenna, run the included RGcable into your home, and place
the Flare booster in a central location where improved signal is needed.
App Installation and Usage:
Download the SureCall App from Google Play or Apple’s App Store.
Use the app to assist with aiming the outside antenna and ensuring proper
separation between the outside antenna and the inside booster/antenna.
Outside Signal Strength:
Performance is highly dependent on your outside signal strength.
Mount the outside antenna where the signal is strongest for optimal results.
Antenna Separation:
Place the booster in a central location and maintain adequate separation
between the booster and antenna. Use the app to check antenna isolation and
ensure proper distance.
FAQ:
Q: How can I identify the best location for my outside antenna?
A: Use the Flare iQ mobile app to wirelessly connect to your booster and
read real-time signal strength to determine the optimal location.
Q: What should I do if my outside signal strength is poor?
A: If the signal is weak where the outside antenna is installed,indoor
coverage will be limited. Consider relocating the outside antenna to a
stronger signal area for better performance.
Q: How do I contact support for further assistance?
A: You can reach out to SureCall support via email at
[email protected] or by calling
1-888-365-6283.
BEFORE YOU BEGIN
Download the SureCall App in the Google Play or Apple’s App Store. Just
search, “SureCall”
FLARE APP:
Use the app to help with two important aspects of any signal booster setup:
Proper aiming of the outside antenna and ensuring adequate separation between
the outside antenna and the inside booster/antenna.
OVERVIEW
Set up the 0 Yagi antenna, run the included RG-6 cable (50 ft) into your home
and place the 3 Flare booster in a central location improved signal is needed.
Once the 4 power supply is connected and the booster is plugged in, use the
app to identify the best location and angle for your outside antenna.
OUTSIDE SIGNAL STRENGTH
Performance is LARGELY BASED ON your outside signal STRENGTH. If signal is
weak where the outside antenna is installed, indoor coverage will be limited.
Mounting the outside antenna where the signal is the strongest yields the best
possible results. Generally, this is above the roof line, on the side of
facing your carrier’s nearest cell tower.
Using the Flare iQ mobile app to wirelessly connect to your booster, identify
the best location and angle for your antenna by reading signal strength in
real time.
ANTENNA SEPARATION
Place the booster in a central location where signal is needed.
Maintain a distance of at least vertical 25 feet, up to 50 feet of horizontal
distance, especially if vertical distance cannot be achieved.
Check antenna isolation on the app. The results reflect whether you have
achieved adequate separation between the booster and antenna.
QUESTIONS?
[email protected]
7 1-888-365-6283